Specifications

1260-14 User Manual

EADS North America Defense Module Specific Syntax 3-7

All lines must be terminated by an ASCII line feed <LF>, EOI or

both.

Write data may be in either decimal, hexadecimal, or binary format.

Non-decimal numbers must be preceded with "H" for hex or "B" for

binary.

Definition of

Commands

PDATAOUT

command

Syntax: PD[ATAOUT] <address>[.<ports>][,<address>

[.<ports>],...]

<address>::= Module address of the 1260-14 (1-12)

<ports>::= One or more consecutive ports to return data from.

A single port is specified as a decimal number from 0 to 11. A

group of ports is specified as two decimal numbers from 0 to 11

separated by a hyphen, (-), with the lower numbered port to the left

and the higher numbered port to the right. For example, the

command string PD 1.3-5 would return values for ports 3, 4 and 5.

Description: The PDATAOUT command will cause the module

specified by the logical address to return the data associated with

each requested port. The format of the return data is as follows:

<address>. 1260-14 DIGITAL INPUT/OUTPUT MODULE

where:

<address>::= A three digit module address. (001-012)

<data>::= From 0 to 256 pieces of data in either

decimal, hexadecimal or binary format.

<port>::= A 2-digit number specifying the port to

associate with the data that follows.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com