User manual

3152B User Manual Publication No. 980935 Rev. M
4-14 ArbConnection Astronics Test Systems
Figure 4-9, Memory Partition Table
The two main fields in the segment table are “Segm No.” (segment
number) and “Segment Size”. “Segm No.”
is an index field that can
have values from 1 to 16 k. The segment size
is always associated
with the segment number. You may program any segment size from
16 (10 in legacy mode) to the capacity of the memory.
Click on the Append button
to add a segment at the end of the
segment list. If you click a segment, it will highlight, and the Append
button becomes an Insert button. Use the Insert button
to insert a
segment before the highlighted segment. Use Delete button to
delete the highlighted segment.
The Clear All button removes all segments from the table and lets
you start a new segment table.
Click on the Close button
discard of the contents of the dialog box
without saving your last actions, and t
o remove the Segment Table
from the screen.
The Save button saves the current session so that you may
continue to configure
the Memory Partition table from the same
point later on. The Download button updates the 3152B
with the
present segment table settings.
TIP
The Memory Partition table does not download
waveforms. Use the memory partition table only if you
have merged multiple waveforms into one. The purpose
of the partition table is to divides the memory contents
into separate segments, each containing a waveform. If
you download waveforms using Waveform Studio, then
the memory is already segmented for the waveforms,