Specifications

SCPI Command Reference 4-16
An Event Register defines which bits in the corresponding event
register are logically ORed together to form a single summary bit.
The user can read from and write to an Enable Register. Querying
an Enable Register will not clear it. The *CLS command does not
clear Enable Registers but it does clear bits in the event registers.
To enable bits in an enable register, write a decimal value that
corresponds to the binary-weighted sum of the bits required to
enable in the register.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com