Users Manual

8
When this screen is shown, the
setting up flow is completed.
Please press “Go back to home”
button.
Catlog Pendant may take a little
while to start logging and sending
data to Catlog Home.
Also, please make sure to take
Catlog Pendant off from Catlog
Home for it to start sending data.
When you first set up Pendant, it may
not have enough battery to start
working.
If so, please leave the Pendant on
Catlog Home for about 4 hours to
fully charge the battery.
App will send you notification if it is
low on battery and when the battery
is full.