User`s manual

2 RabbitLink (EG2100)
1.2 Development and Evaluation Tools
The RabbitLink board comes with a program download cable. This cable connects a Rabbit-based
controller to the RabbitLink board. The RabbitLink tool kit (sold separately from the RabbitLink
board) contains other hardware that may be used with the RabbitLink.
The tool kit contents are:
• RabbitLink (EG2100) User’s Manual with schematics (this document).
• The programming cable connects a PC serial port to the RabbitLink to set up the network
parameters
andtodownload firmware.
• AC adapter, supplies power to the RabbitLink . An AC adapter is supplied with tool kits sold in
the North American market. If you are using another power supply, a minimum of 9-24
Vat
120 mA is recommended.
• Plastic enclosure with four customer-installable light pipes.
• Screwdriver.
• The Companion CD contains RabbitLink firmware and the RFU.
Figure 2. RabbitLink Development Tools
PROG
DIAG
PROG
DIAG
Programming
Cable
Program Download
Cable
Companion CD
AC Adapter
(North American
kits only)
Screwdriver
Plastic Enclosure
User's Manual
LED Light Pipes