User`s manual
36 RabbitLink (EG2100)
E.4 E-Mail Commands
mail <e-mail address>
<subject>
<body>
<ctrl-D>
The mail command sends an e-mail via the RabbitLink to the specified address.
e-mail
address
The address to which the e-mail is sent; e.g. rabbit@warren.com.
subject After receiving the mail command, the RabbitLink will accept the next
string as the subject of the e-mail
body After receiving the subject of the e-mail, the RabbitLink will accept
strings that follow as the body of the e-mail.
ctrl-D ctrl-D (0x04) is the end of the e-mail.
set mail from <e-mail address>
This command sets the RabbitLink’s e-mail address. The address will be included in the
From line of all e-mail messages sent from the RabbitLink. Any error responses from the
SMTP server will be sent to this address.
e-mail
name
E-mail address of the RabbitLink; e.g. rabbit@warren.com.
set mail server <IP address>
This command sets the IP address of the mail server.
IP address The IP address of the mail server in dotted decimal format.