User`s manual

4 RabbitLink (EG2110)
1.3 Development and Evaluation Tools
The RabbitLink board comes with two program download cables. These cables connect a
Rabbit-based single-board computer to the RabbitLink board. They are functionally iden-
tical, differing in physical size to accommodate different Rabbit-based single-board com-
puters. The RabbitLink Tool Kit (sold separately from the RabbitLink board) contains
other hardware that may be used with the RabbitLink.
The Tool Kit contents are:
• RabbitLink (EG2100) Getting Started instructions. A black
square indicates pin 1 of all headers shown in the manual.
• The programming cable. Connects a PC serial port to the
RabbitLink to set up the network parameters and to download firmware.
• AC adapter. Supplies power to the RabbitLink . An AC adapter is supplied with Tool
Kits sold in the North American market. If you are using another power supply, a mini-
mum of 9–24 V DC at 120 mA is recommended.
• Plastic enclosure with 4 customer-installable light pipes.
• Screwdriver.
• The companion CD. Contains RabbitLink firmware and the RFU.
Figure 2. RabbitLink Development Tools
J1
Pin 1
Rabbit and Dynamic C are registered trademarks of Rabbit Semiconductor Inc.
RabbitLink (EG2110)
Tool Kit Contents
The RabbitLink Tool Kit contains the following items:
• Companion CD-ROM with RabbitLink firmware and the Rabbit Field Utility (RFU).
• Programming cable, used to connect PC serial port to the programming port.
• AC adapter, 12 V, 1 A (supplied with Tool Kits sold in the North American market). If you are
using another power supply, a minimum of 9–24 V DC at 120 mA is recommended.
• Program download cables.
• Plastic enclosure with 4 customer-installable light pipes.
•
Screwdriver.
• Getting Started instructions.
• Rabbit 2000 Processor Easy Reference poster.
• Rabbit 3000 Processor Easy Reference poster.
• Registration card.
Companion CD Software
The firmware on the companion CD is already loaded at the factory. The Rabbit-
Link User’s Manual explains how to reload or replace the firmware. The Rabbit
Field Utility is included on the companion CD for this purpose.
PROG
DIAG
Programming
Cable
Companion CD
AC Adapter
(North American
kits only)
Screwdriver
Plastic Enclosure
Getting Started
Instructions
LED Light Pipes