User`s manual

User’s Manual 1
1. INTRODUCTION
This chapter introduces the RabbitLink Network Programming
Gateway and describes its features.
Rabbit-based embedded systems are normally programmed using a direct connection
between a PC and the programming port of the Rabbit-based system. The RabbitLink
provides an indirect connection between the two for remote downloading and debugging
of Rabbit-based systems using either the Rabbit 2000 or the Rabbit 3000 microprocessor.
NOTE: The RabbitLink Network Programming Gateway cannot be used in systems
based on Rabbit microprocessors other than the Rabbit 2000 or the Rabbit 3000.
Figure 1. Remote Network Access via RabbitLink Network Gateway