User`s manual

User’s Manual 27
APPENDIX B. PLASTIC ENCLOSURE
The plastic enclosure provides a secure way to enclose your RabbitLink board. The enclo-
sure itself may be mounted on any flat surface.
Appendix B describes how to mount the RabbitLink board inside the plastic enclosure,
how to install the optional light pipes, and provides details on mounting the assembly.
B.1 Assembly
1. Attach the RabbitLink board to the plastic enclosure base.
Position the RabbitLink board over the plastic enclosure base as shown below in
Figure B-1. Attach the board to the base using the two 4-40 × ¼ screws supplied.
Figure B-1. Attach RabbitLink Board to Plastic Enclosure Base
Flash
EPROM
Flash
EPROM
90
15
65
SRAM