User`s manual

24 RabbitLink (EG2110)
A.1 Electrical and Mechanical Specifications
Figure A-1 shows the mechanical dimensions for the RabbitLink. All measurements are in
inches followed by millimeters enclosed in parentheses.
Figure A-1. RabbitLink Dimensions
NOTE: All measurements are in inches followed by millimeters enclosed in parentheses.
All dimensions have a manufacturing tolerance of ±0.01" (0.25 mm).
Flash
EPROM
Flash
EPROM
2.13
(54)
3.43
(87)
2.85
(72)
0.65
(16.5)
4.15
(105)
0.65
(16.5)
Jacks extend
0.16" (4.0 mm)
past edge of
board
90
15
65
SRAM
0.80
(20)
4.15
(105)