User`s manual

User’s Manual 107
APPENDIX D. LCD/KEYPAD MODULE
An optional LCD/keypad is available for the Prototyping Board.
Appendix D describes the LCD/keypad and provides the soft-
ware function calls to make full use of the LCD/keypad.
D.1 Specifications
Two optional LCD/keypad modules—with or without a panel-mounted NEMA 4 water-
resistant bezel—are available for use with the RCM3400 Prototyping Board. They are
shown in Figure D-1.
Figure D-1. LCD/Keypad Module Versions
Only the version without the bezel can mount directly on the Prototyping Board; if you
have the version with a bezel, you will have to remove the bezel to be able to mount the
LCD/keypad module on the Prototyping Board. Either version of the LCD/keypad module
can be installed at a remote location up to 60 cm (24") away. Contact your sales representa-
tive or your authorized Digi distributor for further assistance in purchasing an LCD/keypad
module.
LCD/Keypad Modules