Specifications

Getting Started 3
1.2.1 Physical & Electrical Specifications
Table 2 lists the basic specifications for the RCM3200.
NOTE: For complete product specifications, see Appendix A in the RabbitCore
RCM3200 User’s Manual.
The RCM3200 modules have two 34-pin headers to which cables can be connected, or
which can be plugged into matching sockets on a production device. The pinouts for these
connectors are shown in Figure 1 below.
Figure 1. RCM3200 Connector Pinout
Table 2. RCM3200 Specifications
Specification Data
Power Supply 3.15 – 3.45 V DC (255 mA at 44.2 MHz clock speed)
Size 1.85" × 2.65" × 0.86" (47 mm × 67 mm × 22 mm)
Environmental
–40°C to 70°C, 5–95% humidity, noncondensing
Note:
These pinouts are as seen on
the Bottom Side of the module.
/RES
PB2
PB4
PB6
PF4
PF6
PE7
PE5
PE3
PE0
PG6
PG4
/IORD
SMOD1
VRAM
+3.3V
n.c.
PB0
PB3
PB5
PB7
PF5
PF7
PE6
PE4
PE1
PG7
PG5
/IOWR
SMOD0
/RESET_IN
VBAT_EXT
GND
GND
J2
STATUS
PA6
PA4
PA2
PA0
PF2
PF0
PC1
PC3
PC5
PC7-RxA
PG1
PG3
PD5
PD3
PD7
n.c.
GND
PA7
PA5
PA3
PA1
PF3
PF1
PC0
PC2
PC4
PC6-TxA
PG0
PG2
PD4
PD2
PD6
n.c.
J1
n.c. = not connected