User`s manual

2 RabbitCore RCM3200
1.1 RCM3200 Features
• Small size: 1.85" x 2.73" x 0.86"
(47 mm x 69 mm x 22 mm)
• Microprocessor: Rabbit 3000 running at 44.2 MHz
• (RCM3200 only) 10/100Base-T Ethernet port with supporting LEDs
• 52 parallel 5 V tolerant I/O lines: 44 configurable for I/O, 4 fixed inputs, 4 fixed outputs
• Two additional digital inputs, two additional digital outputs
• External reset input
• Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
parallel I/O lines), I/O read/write
• Ten 8-bit timers (six cascadable) and one 10-bit timer with two match registers
• 512K flash memory, 512K program execution SRAM, 256K data SRAM
• Real-time clock
• Watchdog supervisor
• Provision for customer-supplied backup battery via connections on header J2
• 10-bit free-running PWM counter and four width registers
• Two-channel Input Capture can be used to time input signals from various port pins
• Two-channel Quadrature Decoder accepts inputs from external incremental encoder
modules
• Six CMOS-compatible serial ports: maximum asynchronous baud rate of 5.5 Mbps . Four
ports are configurable as a clocked serial port (SPI), and two ports are configurable as
SDLC/HDLC serial ports.
• Supports 1.15 Mbps IrDA transceiver.
The RCM3209 and RCM3229 modules are similar in form, dimensions, and function to
the RCM3200/RCM3220, and based on the RCM3900 RabbitCore modules which were
first released in 2008.
There are two RCM3200 production models. Contact your Rabbit sales representative for
details.