User`s manual

62 RabbitCore RCM3200
A.1.2 Physical Mounting
A 9/32” (7 mm) standoff with a 2-56 screw is recommended to attach the RCM3200 to a
user board at the hole position shown in Figure A-3 . Either use plastic hardware, or use
insulating washers to keep any metal hardware from shorting out signals on the RCM3200.
Figure A-3. User Board Footprint for RCM3200
J3
1.124
(28.5)
1.341
(34.1)
J1
J2
RCM3200 Footprint
0.079
(2.0)
0.100
dia
(2.5)
0.020 sq typ
(0.5)
0.079
(2.0)
0.314
(8.0)
1.198
(30.4)
1.136
(28.9)
0.332
(8.4)
0.953
(24.2)
1.131
(28.7)
1.043
(26.5)