User`s manual

User’s Manual 61
A.1.1 Headers
The RCM3200 uses headers at J1 and J2 for physical connection to other boards. J1 and J2
are 2 × 17 SMT headers with a 2 mm pin spacing. J3, the programming port, is a 2 × 5
header with a 1.27 mm pin spacing.
Figure A-3 shows the layout of another board for the RCM3200 to be plugged into. These
values are relative to the mounting hole.
Power
3.15 V to 3.45 V DC
255 mA @ 3.3 V
Operating Temperature
-40°C to +70°C (boards manufactured up to May, 2008)
0°C to +70°C (boards manufactured after May, 2008)
Humidity 5% to 95%, noncondensing
Connectors Two 2 × 17, 2 mm pitch
Board Size
1.850" × 2.725" × 0.86"
(47 mm × 69 mm × 22 mm)
*
The RCM3210 was discontinued in July, 2004, and is no longer offered.
Table A-1. RabbitCore RCM3200 Specifications (continued)
Feature RCM3200
RCM3210
*
RCM3220