User`s manual

User’s Manual 21
3.4 Sample Programs
Sample programs are provided in the Dynamic C Samples folder, which is shown below.
The various folders contain specific sample programs that illustrate the use of the corre-
sponding Dynamic C libraries. For example, the sample program PONG.C demonstrates
the output to the Dynamic C STDIO window.
Two folders contain sample programs that illustrate features unique to the RCM3000.
• RCM3000—Demonstrates the basic operation and the Ethernet functionality of the
RCM3000.
• TCPIP—Demonstrates more advanced TCP/IP programming for Z-World’s Ethernet-
enabled Rabbit-based boards.
Follow the instructions included with the sample program to connect the RCM3000 and
the other hardware identified in the instructions.
To run a sample program, open it with the
File menu (if it is not still open), compile it
using the Compile menu (or press F5), and then run it by selecting Run in the Run menu
(or press F9). The RCM3000 must be in Program Mode (see Figure 5) and must be con-
nected to a PC using the programming cable.
More complete information on Dynamic C is provided in the Dynamic C User’s Manual.