Specifications

16 RabbitCore RCM3000
• Dynamic C provides extensions to the C language (such as shared and protected vari-
ables, costatements and cofunctions) that support real-world embedded system devel-
opment. Interrupt service routines may be written in C. Dynamic C supports
cooperative and preemptive multi-tasking.
• Dynamic C comes with many function libraries, all in source code. These libraries sup-
port real-time programming, machine level I/O, and provide standard string and math
functions.
• Dynamic C compiles directly to memory. Functions and libraries are compiled and
linked and downloaded on-the-fly. On a fast PC, Dynamic C can load 30,000 bytes of
code in 5 seconds at a baud rate of 115,200 bps.
3.1 Hardware Requirements
To install and run Dynamic C, your system must be running one of the following operating
systems:
• Windows 95
• Windows 98
• Windows NT
• Windows Me
• Windows 2000
• Windows XP
3.1.1 Hardware Requirements
The PC on which you install Dynamic C for development of RCM3000-based systems
should have the following hardware:
• A Pentium or later microprocessor
• 32 MB of RAM
• At least one free COM (serial) port for communication with the target systems
• A 10Base-T Ethernet network interface port
(optional if you will not be using the RCM3000’s Ethernet port)
• A CD-ROM drive (for software installation)