User`s manual

User’s Manual 47
A.6 Jumper Configurations
Figure A-6 shows the header locations used to configure the various RCM2300 options
via jumpers.
Figure A-6. Location of RCM2300 Configurable Positions
Table A-7 lists the configuration options.
NOTE: The jumper connections are made using 0 Ω surface-mounted resistors.
Table A-7. RCM2300 Jumper Configurations
Header Description Pins Connected
Factory
Default
JP1 Flash Memory Size
1–2 128K/256K
×
2–3 512K
JP2 Flash Memory Bank Select
1–2 Normal Mode
×
2–3 Bank Mode
JP1
JP2
Top Side