User`s manual

User’s Manual 39
It is recommended that you allow for an “exclusion zone” of 0.04" (1 mm) around the
RCM2300 in all directions when the RCM2300 is incorporated into an assembly that
includes other printed circuit boards. An “exclusion zone” of 0.12" (3 mm) is recom-
mended below the RCM2300 when the RCM2300 is plugged into another assembly using
the shortest connectors for headers J4 and J5. Figure A-2 shows this “exclusion zone.”
Figure A-2. RCM2300 “Exclusion Zone”
0.12
(3)
0.12
(3)
1.600
(40.6)
1.150
(29.2)
J4J5
Exclusion
Zone
0.04
(1)
0.24
(6.2)
0.04
(1)
0.24
(6.2)
0.04
(1)
0.04
(1)
0.04
(1)
0.04
(1)