User`s manual

1–2 Introduction & Overview RabbitCore RCM2200
1.1.2 Physical & Electrical
Specifications
Table 1 –1 lists the basic specifications for the
RCM2200.
NOTE: For complete product specifi-
cations, see Appendix A in the Rab-
bitCore RCM2200 User’s Manual.
The RCM2200 modules have two 26-pin headers to
which cables can be connected, or which can be
plugged into matching sockets on a production
device. The pinouts for these connectors are shown
in Figure 1–1 below.
Table 1–1: RCM2200 specifications
Specification Data
Power Supply 4.75 – 5.25 VDC (134 mA at 22.1 MHz clock speed)
Size 2.3 x 1.6 x 0.86 inches (59 x 41 x 22 mm)
Environmental –40
°C to 70°C, 5–95% humidity, non-condensing
Figure 1–1: The complete pinout for the RCM2200 module connectors.
PA0
PA2
PA4
PA6
/RES
PB2
PB4
PB7
D6
D4
D2
D0
VCC
PA1
PA3
PA5
PA7
PB0
PB3
PB5
D7
D5
D3
D1
VBAT
GND
J5
Note:
These pinouts are as seen on
the Bottom Side of the module.
VCC
PC1
PC3
TPOUT+
PD3
PD5
/IOWR
PE1
TPIN+
PE5
PE7
A2
A0
GND
PC0
PC2
TPOUT-
LNK
PD4
/IORD
PE0
TPIN-
PE4
ACT
A3
A1
J4