User`s manual

User’s Manual 25
4.5 Sample Programs
Sample programs are provided in the Dynamic C SAMPLES folder.
The various folders contain specific sample programs that illustrate the use of the corre-
sponding Dynamic C libraries. For example, the sample program
PONG.C demonstrates
the output to the Dynamic C
STDIO window.
Two folders contain sample programs that illustrate features unique to the RCM2200.
•
RCM2200 —Demonstrates the basic operation and the Ethernet functionality of the
RCM2200.
•
TCPIP —Demonstrates more advanced TCP/IP programming for Z-World’s Ethernet-
enabled Rabbit-based boards.
Follow the instructions included with the sample program to connect the RCM2200 and
the other hardware identified in the instructions.
To run a sample program, open it with the
File menu (if it is not still open), then compile
and run it by pressing
F9 or by selecting Run in the Run menu. The RCM2200 must be in
Program Mode (see Section 3.3, “Programming Cable”), and must be connected to a PC
using the programming cable.
The sample programs for the RCM2200 are described in detail in the RCM2200 Getting
Started Manual.