User`s manual

3–4 Software Reference RabbitCore RCM2100 Series
3.2.3 TCP/IP Drivers
The TCP/IP drivers are located in the TCPIP direc-
tory.
Complete information on these libraries and the
TCP/IP functions is provided in the Dynamic C Pre-
mier TCP/IP Function Reference Manual.
3.3 Sample Programs
Sample programs are provided in the Dynamic C
Samples folder, which is shown below.
The various folders contain specific sample pro-
grams that illustrate the use of the corresponding
Dynamic C libraries. For example, the sample pro-
gram PONG.C demonstrates the output to the
Dynamic C STDIO window.
Two folders contain sample programs that illustrate
features unique to the RabbitCore RCM2100.
• RCM2100—Demonstrates the basic operation
and the Ethernet functionality of the RabbitCore
RCM2100.
• TCPIP—Demonstrates more advanced TCP/IP
programming for Z-World’s Ethernet-enabled
Rabbit-based boards.
Follow the instructions included with the sample
program to connect the RabbitCore RCM2100 and
the other hardware identified in the instructions.
To run a sample program, open it with the File
menu (if it is not still open), compile it using the
Compile menu, and then run it by selecting Run in
the Run menu. The RabbitCore RCM2100 must be
in Program Mode (see Section 2.5, “Programming
Cable”) and must be connected to a PC using the
programming cable.
More complete information on Dynamic C is pro-
vided in the Dynamic C Premier User’s Manual.