User`s manual
OP7100 Overview
15
CE Compliance
The OP7100 has been tested and was found to be in
conformity with applicable EN immunity and emission
standards. Note the following requirements for incorporat-
ing the OP7100 into your application to comply with CE
requirements.
• The power supply provided with the Tool Kit is for development
purpose only. It is the customer’s responsibility to provide a CE
compliant power supply for their end-product application.
• The OP7100 has been tested to meet the following immunity standards.
EN61000-4-2 (ESD)
EN61000-4-3 (Radiated Immunity)
EN61000-4-4 (EFT)
EN61000-4-6 (Conducted Immunity)
Additional shielding or filtering may be required for a heavy industrial
environment.
• The OP7100 has been tested to meet the EN55022 Class A emissions
standard with ferrite RFI suppressors on the I/O cables. Additional
shielding or filtering may be needed to meet Class B emissions
standards.
Since Rabbit Semiconductor products are connected to other devices, good
EMC prac-tices should be taken to ensure compliance. CE compliance is
eventually the responsibility of the integrator. For more information on tips
and technical assistance, visit our Web site at www.rabbit.com/products/
ce
_
certification/, or contact your local authorized Rabbit Semiconductor
distributor.