User`s manual

EM1500 User’s Manual www.rabbit.com 33
Area #1. Select EM1500 for Configuration
The listbox in the upper left corner is where
you select EM1500s or configuration data-
bases for viewing and manipulation. File
editing operations may be performed on
any selected entry. For example, double
click on the configuration database
default.emc, then single click one of
its configurations. Now press <Ctrl+C> to
copy the selected configuration to the clipboard; select an EM1500 entry (another single click) and
press <Ctrl+V> to paste the configuration from default.emc to the EM1500. Other file operations
(i.e., Open, Save, Close, etc.) may be performed on the configuration database entries, but not the
EM1500 entries.
Area #2. Status/Debug for Selected Unit
The area immediately under the listbox is the
status/debug area. Unless an EM1500 entry is
selected in the listbox, the status/debug area is
empty and looks like an extension of the list-
box. The figure shown here displays the status
for the EM1500 that was selected in the listbox
above. The status/debug area is discussed in
detail in Section 5.1.11.
Area #3. Configuration Parameters for Selected
Unit
The right side of the program window is where
the configuration information is displayed for
the selection made in the listbox. You must
select an EM1500 in the listbox to access its
configuration information.
Area #4. Message Scroll Box
The scroll area along the bottom is where you receive status and error messages from the application.
For now we are going to concentrate on area #3 containing the configuration parameters.