User`s manual

EM1500 User’s Manual www.rabbit.com 9
The other EM1500 Tool Kit items are:
• 24V power supply (Tool kits sold outside North America do not include a power supply. The power
requirements are 9 V to 36 V DC, 1.5 W typical.)
• Wire kit 22 AWG (Rabbit Part # 805-0038)
• Rabbit Engineering Demo Board
• EM1500 User’s Manual
• CD containing the Window and Linux versions of the stand-alone configuration program, a binary
version of the EM1500 firmware, and the RFU (and support files: flash.ini,
coldload.bin, pilot.bin) to download the firmware.
• Rabbit screw driver
1.4.1 Rabbit Engineering Demo Board
The demo board is useful for testing the functionality of the relay and digital I/O on the 9-pin connector.
Look in Section 2.3 for some tips on how to use it.
1.5 Contact Information
If you purchased your EM1500 through a distributor or Rabbit Semiconductor partner, contact the distribu-
tor or Rabbit partner first for technical support.
To contact Rabbit Semiconductor:
• Check the Rabbit Technical Bulletin Board at www.rabbit.com/support/bb/.
• Use the Technical Support e-mail form at www.rabbit.com/support/questionSubmit.shtml.