User`s manual

EM1500 User’s Manual www.rabbit.com 7
Opening
Local TCP port
SER1-8888, SER2-8889, SER3-8890
SER4-8891, RS485-8892
Remote TCP port same as local TCP port
Ephemeral port ON (all serial ports)
Use Nagle ON (all serial ports)
Don’t Purge OFF (all serial ports)
Incoming connection Always (all serial ports)
Active Open: Always OFF (all serial ports)
Active Open: When DSR/DTR OFF (all serial ports)
Active Open: When DCD OFF (all serial ports)
Active Open: When RI OFF (all serial ports)
Active Open: Any char OFF (all serial ports)
Active Open: Specific char OFF (all serial ports)
Active Open: Char to open 13 (all serial ports)
Closing
DSR/DTR dropped OFF (all serial ports)
Modem control, not close on
DSR/DTR drop
OFF (all serial ports)
DCD dropped OFF (all serial ports)
Network timeout OFF (all serial ports)
Protocol
Modem Server ON (all serial ports)
Rabbit Extensions ON (all serial ports)
Packetizing None (all serial ports)
Table 1-3. EM1500 Default Configuration Parameters
Configuration
Category
Configuration Parameter Default Setting