Specifications

Wireless Solutions
Wireless Solutions
CHIPCON Single-Chip RF Transceivers
10
www.mouser.com/chipcon
[phone]
The CC2510Fx/CC2511Fx is a low-cost true system-on-chip (SoC) device
designed for low power and low-voltage wireless communication applications.
The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-
the-art RF transceiver CC2500 with an industry-standard enhanced 8051
MCU, 8/16/32 kB of in-system programmable flash memory, 1/2/4 kB of RAM
and many other powerful features. The CC2510Fx/CC2511Fx is available in
six different versions: CC2510F8 and CC2511F8 with 8 kB of Flash and 1 kB
of AM, the CC2510F16 and CC2511F16 with 16 kB of Flash and 2 kB of
RAM, and CC2510F32 and CC2511F32 with 32 kB of Flash and 4 kB of RAM.
The CC2510Fx/CC2511Fx is highly suited for systems where very low power
consumption is required. This is ensured by several advanced low-power
operating modes. The CC2511Fx adds a full-speed USB interface to the
feature set of the CC2510Fx. Interfacing to a PC using the USB interface is
quick and easy, and the high data rate (12 Mbps) of the USB interface avoids
the bottlenecks of RS-232 or low-speed USB interfaces.
CC2510FX/CC2511FX 2.4 GHZ SOC TRANSCEIVER
WITH 8051 MCU
Key Features:
•
High performance and low power 8051
microcontroller core.
•
High-performance CC2500 RF transceiver
based on the market-leading CC2500
•
Frequency band: 2.4 GHz
•
8/16/32 kB in-system programmable flash
•
1/2/4 kB RAM + 1 kB USB FIFO (CC2511Fx)
•
Full-Speed USB Controller (CC2511Fx )
•
I2S interface
•
8-14 bits ADC with up to eight inputs
•
128-bit AES security coprocessor
•
Powerful DMA functionality
•
Two USARTs
•
16-bit timer with configurable mode
•
Three 8-bit timers
•
Hardware debug support
•
21 (CC2510Fx ), 19 (CC2511Fx ) GPIO pins
•
Wide supply voltage range (2.0V – 3.6V)
•
High sensitivity (–100 dBm at 10 kbps)
•
Programmable data rate up to 500 kbps
•
Low current consumption (RX: 22 mA, TX:
23 mA, with MCU running at 26 MHz)
•
MCU current consumption 270ìA/MHz
•
Programmable output power up to 1 dBm
for all supported frequencies
•
Digital RSSI / LQI support
•
Excellent receiver selectivity and blocking
performance
•
0.3 A consumption in lowest power mode
•
RoHS compliant 6x6mm QLP36 package
•
Point-of-sale systems
•
Active RFID and asset tracking systems
•
Home and building automation
•
Low power telemetry
•
2.4 GHz ISM/SRD band systems
Applications:
•
Wireless keyboard and mouse
•
Wireless voice-quality audio
•
CC2511Fx: USB dongles
•
Remote controls
•
Wireless sports and leisure equipment
Specifications:
• CC2510Fx Operating Ambient Temperature, TA: -40 Min to 85 Max °C
• CC2510Fx Operating Supply Voltage : 2.0 Min to 3.6 Max V
• CC2511Fx Operating Ambient Temperature, TA: 0 Min to 80 Max °C
• CC2511Fx Operating Supply Voltage : 3.0 Min to 3.6 Max V
CC2510Fx/CC2511Fx Block Diagram
Overview of external components (excluding supply decoupling capacitors)
Application Circuit for CC2510Fx
Application Circuit for CC2511Fx with USB and fundamental crystal
Application Circuit for CC2511Fx with USB and 3rd overtone crystal
2.0V-3.6V power supply
R271
C241
L241
C242
Antenna
(50 Ω)
C234
C233
L232
L231
C232
C231
Alternative:
Folded dipole PCB
antenna (no external
components needed)
C211
C201
X1
C171
X2
C181
Optional
C301
2,10 DVDD
30 DCOUPL
18 XOSC32 Q2 17 XOSC32 Q1 20 XOSC Q2 19 AVDD 21 XOSC Q1
AVDD 2 2
RF_P23
RF_N24
AVDD 2 5
AVDD 2 6
RBIAS27
GUARD28
AVDD DREG29
DIE ATTACH PAD
3.0V-3.6V power supply
R271
C241
L241
C242
Antenna
(50 Ω)
C234
C233
L232
L231
C232
C231
Alternative:
Folded dipole PCB
antenna (no external
components needed)
C214
C203
X3
C171
X2
C181
Optional
R262
R263
R264
10 DP
11 DP
2,12 DVDD
30 DCOUPL
18 XOSC32 Q2 17 XOSC32 Q1 20 XOSC Q2 19 AVDD 21 XOSC Q1
AVDD 2 2
RF_P23
RF_N24
AVDD 2 5
AVDD 2 6
RBIAS27
GUARD28
AVDD DREG29
DIE ATTACH PAD
D+
D-
3.0V-3.6V power supply
R271
C241
L241
C242
Antenna
(50 Ω)
C234
C233
L232
L231
C232
C231
Alternative:
Folded dipole PCB
antenna (no external
components needed)
C214
L281
C212
C202
X4
C171
X2
C181
Optional
R262
R263
C301
R264
10 DP
DIGITAL
VDD (2.0-3.6V)
DCOUPL
ON-CHIP VOLTAGE
REGULATOR
POWER ON RESET
SFR BUS
SLEEP TIMER
WATCHDOG TIMERRESET
RESET_N
XOSC_Q2
XOSC_Q1
P2_4
P2_3
P2_2
P2_1
P2_0
P1_7
P1_6
P1_5
P1_4
P1_3
P1_2
P1_1
P1_0
CC2510
P0_7
P0_6
P0_4
P0_3
P0_2
P0_1
P0_0
P0_5
26 MHz
CRYSTAL OSC
CLOCK MUX &
CALIBRATION
HIGH-SPEED
RC-OSC
LOW PWR
RC-OSC
MEMORY
ARBITRATOR
CODE
XDATA
DATA
SFR
UNIFIED
POWER MGT. CONTROLLER
1 KB
FIFO SRAM
USB
4 KB
SRAM
RAM
FLASH
32 KB
FLASH
FLASH CTRL
I2S
RADIO/I2S REGISTERS
AES
ENCRIPTION &
DECRYPTION
USART 0
USART 1
TIMER 1 (16-BIT) +
ΔΣ MODULE
TIMER 2 (8-BIT MAC TIMER)
TIMER 3 (8-BIT)
TIMER 4 (8-BIT)
RADIO DATA INTERFACE
AGC
DE-
MODULATOR
MODULATOR
TRANSMIT
CHAIN
RECIEVE
CHAIN
RF_P RF_N
SYNTH
FRAME CONTROL
FREQUENCY
SYNTHESIZER
USB PHY
DP
CC2511
DM
USB BUS
ANALOG
MIXED
2,12 DVDD
30 DCOUPL
18 XOSC32 Q2
17 XOSC32 Q1
20 XOSC Q2
19 AVDD
21 XOSC Q1
AVDD 2 2
RF_P23
RF_N24
AVDD 2 5
AVDD 2 6
RBIAS27
GUARD28
AVDD DREG29
DIE ATTACH PAD
CC251
CC2511
CC2510
D+
D-
8051 CPU
CORE
32.768 kH
CRYSTAL OSC
DEBUG
INTERFACE
DMA
IRQ CTRL
ΔΣ ADC
AUDIO/DC
I/O CONTROLLER
MOUSER
STOCK NO.
Chipcon/TI
Part No.
Flash
kB
RAM
kB
Price Each
25
1
SOC Transceiver
839-CC2510F8RSP CC2510F8RSP 8 1 7.99 7.55
839-CC2510F16RSP CC2510F16RSP 16 2 9.87 9.25
839-CC2510F32RSP CC2510F32RSP 32 4 10.61 10.09
SOC Transceiver with on-board USB Interface
839-CC2511F8RSP CC2511F8RSP 8 1 8.75 8.49
839-CC2511F16RSP CC2511F16RSP 16 2 10.05 9.81
839-CC2511F32RSP CC2511F32RSP 32 4 11.21 9.81
MOUSER
STOCK NO.
Chipcon/TI
Part No.
Description
Price Each
839-CC2510-CC2511DK CC2510-CC2511DK Development Kit 710.00
Component Component
C301 Decoupling capacitor for on-chip voltage regulator to digital part
C203/C214 Crystal loading capacitors (fundamental crystal)
C202/C212/C213 Crystal loading capacitors (3rd overtone crystal)
C201/C211 Crystal loading capacitors, see section 14 on page 190 for details
C231/C241 RF balun DC blocking capacitors
C232/C241 RF balun/matching capacitors
C233/C234 RF LC filter/matching capacitors
C181/C171 Crystal loading capacitors if X2 is used.
L231/L241 RF balun/matching inductors (inexpensive multi-layer type)
L232 RF LC filter inductor (inexpensive multi-layer type)
L281 Crystal inductor
R271 56 kΩ resistor for internal bias current reference, 1% tolerance
R264 D+ Pullup resistor
R262/R263 D+ / D- series resistors for impedance matching
X1 26 MHz -27 MHz crystal, see section 14 on page 190 for details
X2 32.768 kHz crystal, optional
X3 48 MHz crystal (fundamental)
X4 48 MHz crystal (3rd overtone)
NEW TECHNOLOGY NEW TECHNOLOGY NEW TECHNOLOGY NEW TECHNOLOGY
Chipcon
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download