Specifications

Single Board Computers
Rabbit Semiconductor
57
RABBIT Single Board Computers
OP7200 EDISPLAY
www.mouser.com/rabbitsemi
[phone]
The OP7200 eDisplay is an intelligent operator interface that offers rugged I/O, built-in Ethernet connectivity, and optional A/D and
touchscreen capabilities. The compact eDisplay is an ideal data acquisition and display device for OEM products and stand-alone
systems such as factory floor controls. The unit's 10Base-T Ethernet facilitates remote diagnostics, control, and communication,
including sending and receiving E-mails and alerts.
MOUSER
STOCK NO.
Description
Price
Each
Tool Kit
Mfr.
Mfr. Part No.
812 - 101-0535 Touchscreen 449.00
812 - 101-0537 Touchscreen 512K/512K 489.00
812 - 20-101-0536 OP7210, RoHS 399.00
812 - 101-0538 OP7210 512K/512K 439.00
Product Only
Expansion Boards
Programming/Development Tools
Feature
Specifications:
OP7200
812 - 101-0688 RabbitNet D/A Expansion Card 89.00
812 - 101-0617 RN1400 RabbitNet Relay Expansion Card 89.00
812 - 101-0616 RabbitNet A/D Expansion Card 89.00
812 - 20-101-0612 RabbitNet I/O Expansion Card, RoHS 89.00
694 - 101-0467 8 Meg Serial Flash 89.00
812 - 101-0282 Universal Relay Board 99.00
812 - 20-101-0879 RN1600 RabbitNet Relay Keypad/Display, RoHS 69.00
Interface Card
694 - 101-0666 Dynamic C Module 359.00
694 - 540-0070 RS-232-to-USB Converter Cable 39.00
694 - 101-0580 RabbitLink Card 129.00
694 - 101-0589 Rabbit Cloning Board 89.00
812 - 101-0887 RN1600 RabbitNet Expansion Kit 149.00
Microprocessor Rabbit 2000™ at 22.1 MHz
Ethernet Port 10Base-T, RJ-45
Flash 256K
SRAM 128K
Backup Battery Socketed 3 V lithium coin-type, 265 mA·h, supports RTC and SRAM, connection for
user-supplied external battery
Keypad/Display 1/4 VGA (320 _ 240 pixels) with programmable on/off white LED backlight, 9-key tactile
feedback keypad
4096 x 4096 analog touchscreen No touchscreen
LEDs 4: Power On, Microprocessor Error, Ethernet Link Alive, Ethernet Activity
Digital Inputs 19 protected to ±36 VDC 16 protected to ±36 VDC
Digital Outputs 8: individually configurable in software; sink up to 350 mA, source up to 250 mA, or
tri-state; 40 VDC max.
Analog Inputs Eight 11-bit single-ended or four 12-bit None
differential, 200 kW input impedance,
2.5 ksamples/sec. Eight software-
controlled programmable gain/voltage
ranges from 0–1 V to 0–20 V.
Serial Ports 4 CMOS-compatible: 1 RS-485 (or I/O expansion port), 2 RS-232 (one 5-wire or two
3-wire), One 5V CMOS-compatible (programmable)
Serial Rate Max. burst rate = CLK/32, Max. sustained rate = CLK/64
Real-Time Clock Yes
Timers Five 8-bit timers (4 cascadable from the first) and one 10-bit timer with 2 match registers
Watchdog/Supervisor Yes
Power 9–40 VDC or 24 VAC, 4 W max.
Operating Temp –10° to +65°C
Humidity 20–70%, noncondensing
I/O Connectors Screw terminals support max. 14 AWG/1.5 mm2 (standard)
Product Size 5.67" x 4.41" x 1.70" (144 x 112 x 43 mm)
Display Area 3.0" x 2.2" (76 x 56 mm)
OP7210
812 - 101-0500 MiniCom Tool Kit (board not included) 200.00
MOUSER
STOCK NO.
Description
Price
Each
Tool Kit
Mfr.
Mfr. Part No.
812 - 101-0492 OP6800 249.00
812 - 20-101-0654 OP6800 512K/512K, RoHS 289.00
812 - 20-101-0497 OP6810, RoHS 199.00
Product Only
Expansion Boards
Programming/Development Tools
694 - 101-0467 8 Meg Serial Flash 89.00
812 - 101-0282 Universal Relay Board 99.00
694 - 101-0666 Dynamic C Module 359.00
812 - 101-0505 OP6800 Proto Board 49.00
694 - 540-0070 RS-232-to-USB Converter Cable 39.00
694 - 101-0580 RabbitLink card 129.00
694 - 101-0589 Rabbit Cloning Board 89.00
OP6800 MINICOM
The MiniCom is a low-cost, C-programmable operator interface and single-board computer that offers Ethernet connectivity, plenty of
industrialized I/O, a graphic LCD, and keypad. The MiniCom's compact 4.5" x 3.6" (112 x 91 mm) form factor makes it ideal for use in
designs and areas with size constraints. Available in both Ethernet-enabled and non-Ethernet versions, the MiniCom provides
comprehensive integrated control, display, and networking capabilities via Internet/Ethernet or serial communications.
Feature
OP6810OP6800
Microprocessor Rabbit 2000 at 22.1 MHz
Ethernet Port 10Base-T, RJ-45 None
Flash 256K 128K
SRAM 128K 128K
Backup Battery Connection for user-supplied battery (to support RTC and SRAM)
Keypad/Display 122 x 32 pixel graphic LCD in two stacked sections (with programmable backlight),
user-relegendable keypad with 7-key / 7-LED interface
LEDs 7 hardware- or software-driven: 1 red, 4 green, 2 yellow
Digital Inputs 13 total: 8 protected to ±36 VDC, 5 protected to ±25 VDC
Digital Outputs 11 total: sink 200 mA, 40 VDC max., 4 with built-in inductive load-protection diode
Serial Ports 4 total: two 3-wire or one 5-wire RS-232, 1 RS-485, and one 5 V CMOS-compatible
(programming)
Serial Rate Max. burst rate = CLK/32 Max. sustained rate = burst/2
Connectors 2 x 20, 0.1" pitch ribbon-cable header
Real-Time Clock Yes
Timers Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match
registers
Watchdog/Supervisor Yes
Power 9–36 VDC, 1.5 W max.
Operating Temp 0–50°C
Humidity 5–95%, non-condensing
Product Size 4.5" x 3.6" x 1.33" (112 x 91 x 33 mm)
Specifications:
812 - 101-0543 OP7200 Tool Kit (board not included) 200.00
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download