Specifications

ManualsBrandsRabbit ManualsComputer equipmentEM1500

Embedded Modules

Rabbit Semiconductor

694

20-101-0541 Keypad/Display Unit in Plastic Case. Water-resistant 99.00

remote keypad/display, 7-key/122 x 32 pixel LCD oper.

at 2.7-5V DC. (Cable not included, see below).

694

540-0066 Keypad/Display Unit Cable. 20" cable for 15.00

panel-mount keypad/display unit.

694

101-0403 TCP/IP Tool Kit 99.00

694

20-101-0467 8MB serial Flash Expansion Board 119.00

694

540-0070 RS-232-to-USB Converter Cable 39.00

694

151-0113 Connector Adapter Board 15.00

C61

C48

R25

R11

C31

R17

C22

C34

C33

C24

C25

R21

C59

C53

C55

R24

C13

C23

JP3

C50

C51

RP2

RP3

RP4

C56

C39

-1

225

MOUSER STOCK NO.

Mfr.

Mfr. Part No.

RABBIT Microprocessor Core Modules

The RCM3200 RabbitCore microprocessor core module is an ideal option for designers who want to rapidly develop and implement embedded systems with integrated 10/100Base-T Ethernet connectivity. Measuring only 2.73" x 1.85" (69

x 47 mm), the RCM3200 operates at 3.3 V (with 5 V-tolerant I/O) and features 6 serial ports. Built-in low-EMI features, including a clock spectrum spreader, practically eliminate EMI problems, helping OEMs pass CE and regulatory RF

emissions tests. Powered by the Rabbit 3000® microprocessor running at 44.2 MHz, the RCM3200 is equipped with 512K Flash memory, 512K program execution SRAM and 256K data SRAM, quadrature decoder, PWM outputs, and

pulse capture capabilities. Two 34-pin connection headers provide 52 digital I/O shared with the 6 serial ports and alternate I/O features. The integrated Ethernet port allows real-time local or worldwide connectivity. The RCM3200 features

a battery-backable real-time clock, glueless memory and I/O interfacing, and low-power "sleepy" modes. A fully enabled slave port permits easy master-slave interfacing with another processor-based system, and an alternate I/O bus can

be configured for 8 data lines and 6 address lines (shared with parallel I/O). The Rabbit 3000 processor's compact, C-friendly instruction set and high clock speeds produce exceptionally fast results for math, logic, and I/O. RabbitCores

mount directly on a user-designed motherboard and act as the controlling microprocessor for the user's system. RabbitCores can interface with all manner of CMOS-compatible digital devices through the user's motherboard. Programs are

developed with our industry-proven Dynamic C® SE development system, a C-language environment that includes an editor, compiler, and in-circuit debugger (Dynamic C SE is included in low-cost development kits). Efficient hardware

and software integration facilitates rapid design and development. User programs can be compiled, executed, and debugged using Dynamic C and a programming cable-no in-circuit emulator is required. An extensive library of drivers

and sample programs is provided, along with royalty-free TCP/IP stack with source.

RCM3200 RABBITCORE MICROPROCESSOR MODULE (44.2MHZ)

Designing with RabbitCores:

The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation

of embedded systems. RabbitCores are powered by high-performance 8-bit Rabbit microprocessors with extensive

integrated features and a C-friendly instruction set designed for use with the Dynamic C® SE development system.

The RabbitCore mounts on a user-designed motherboard and acts as the controlling microprocessor for the user's

system. Small in size but packed with powerful features, these core modules give designers a complete package for

control and communication. The integrated Ethernet port frees designers from the limitations of serial-port

communications and control and permits instant local or worldwide connectivity using low-cost networking hardware.

Embedded systems using the Ethernet RabbitCore module can be controlled and monitored (as well as programmed

and debugged when using appropriate accessory hardware) across any network or the Internet.

Price Each

Description

Available Options and Accessories

Development Kit

Feature:

RCM3200

Microprocessor

Rabbit 3000 at 44.2 MHz

Ethernet Port

10/100Base-T, RJ-45, 3 LEDs

SRAM

512K program + 256K data

Backup Battery

Connection for user-supplied battery (to support RTC and SRAM)

Auxiliary I/O Bus

8 data and 6 address (shared with I/O), plus I/O Read-Write

Serial Ports

6 CMOS-compatible:

• 6 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI),

and 2 as SDLC/HDLC (with IrDA)

• 1 asynchronous clocked serial port dedicated for programming

• Support for MIR/SIR IrDA transceiver

Serial Rate

Max. asynchronous baud rate = CLK/8

Slave Interface

Slave port permits use as master or intelligent peripheralwith

Rabbit-based or other master controller

Timers

Ten 8-bit timers (6 cascadable from the first) and one

10-bit timer with 2 match registers

Features:

•

10/100Base-T Ethernet

•

Rabbit 3000® microprocessor at 44.2 MHz

•

3.3 V operation

•

Low-EMI

•

512K Flash

•

52 digital I/O:

44 configurable I/O

4 fixed inputs

4 fixed outputs

•

With Real-Time Clock

•

With Watchdog/Supervisor

•

Power:

3.15–3.45 V DC,

255 mA @ 3.3 V

•

Operating Temp.: -40° to +70°C

•

Humidity: 5-95%, non-condensing

•

Additional Inputs: 2 Startup Mode, Reset In

•

Additional Outputs: Status, Reset Out

•

Connectors: Two 2 x 17 (2mm pitch)

•

Board Size: 2.73" x 1.85" x 0.86" (69 x 47 x 22 mm)

Pulse-Width

Modulators

10-bit free-running counter and four pulse-width registers

Input Capture

2-channel input capture can be used to time input

signals from various port pins.

Quadrature

Decoder

2-channel quadrature decoder accepts inputs

from external incremental encoder modules.

The RCM3400 analog RabbitCore provides a known-good processor and analog input subsystem for OEMs to quickly integrate into custom designs. The RCM3400 features a low-EMI Rabbit 3000-based CPU subsystem running at 29.4

MHz, with 512K Flash / 512K SRAM or 256K Flash / 256K SRAM, 5 serial ports, and 8 channels of programmable gain analog input in an extremely small footprint (1.37" x 1.16" / 34 x 29 mm). The RCM3400 comes with a pre-assigned

MAC I.D. to be Ethernet ready and the development board features 10/100Base-T Ethernet and can be used as a reference design in conjunction with Dynamic C's royalty-free TCP/IP software libraries. Extensive demo programs and

software application templates make it easy to get the RCM3400 up and running in record time. RabbitCores mount directly on a user-designed motherboard and can interface with all manner of CMOS-compatible digital devices. Two

34-pin connectors route 47 digital I/O (shared with serial ports), power, and other signals to the motherboard. Built-in low—EMI features, including a clock spectrum spreader, practically eliminate EMI problems, helping OEMs pass CE and

regulatory RF emissions tests. The RCM3400 is equipped with 5 V tolerant I/O, quadrature encoder inputs, PWM outputs, and pulse capture and measurement capabilities. The RCM3400 also features a battery-backable real-time clock,

glueless memory and I/O interfacing, and low-power "sleepy" modes. A fully enabled 8-bit slave port permits easy master-slave interfacing with another processor-based system, and an alternate I/O bus can be configured for 8 data lines

and 6 address lines (shared with parallel I/O). Programmed with Dynamic C, the RCM3400 executes math, logic, and I/O exceptionally quickly. The Rabbit 3000 chip, RCM3400, and Dynamic C were designed in a complementary fashion

for maximum performance and ease of use in embedded systems. Our industry-proven Dynamic C® development system is a C—language environment that includes an editor, compiler, and in-circuit debugger. User programs can be

compiled, executed, and debugged using Dynamic C and a programming cable-no in-circuit emulator is required. An extensive library of drivers and sample programs is provided, including royalty-free TCP/IP stack with source code.

RCM3400 RABBITCORE MICROPROCESSOR ANALOG MODULE (29.4MHZ)

Description

Above accessories for RCM3200 are applicable with RCM(3400, 3410)

Except: Connector Adapter Board

Available Options and Accessories

694

101-0587 RCM3400 Development Kit 399.00 - - -

Development Kit

Feature:

RCM3410

RCM3400

Microprocessor

Rabbit 3000 at 29.4 MHz

Analog Inputs

Backup Battery

Connection for user-supplied battery (to support RTC and SRAM)

Auxiliary I/O Bus

8 data and 6 address (shared with I/O), I/O Read-Write

Serial Ports

5 CMOS-compatible:

• 4 configurable as asynchronous (with IrDA), 3 as

clocked serial (SPI), and 2 as SDLC/HDLC (with IrDA)

• 1 asynchronous serial port dedicated for programming

• Support for MIR/SIR IrDA transceiver

Serial Rate

Max. asynchronous baud rate = CLK/8

Timers

Ten 8-bit timers (6 cascadable from the first) and

one 10-bit timer with 2 match registers

8 channels single-ended (11-bit) or

4 channels differential (12-bit)

Programmable gain: 1, 2, 4, 5, 8, 10, 16, and 20 V/V. Vref, Convert

Pulse-Width

Modulators

10-bit free-running counter and four pulse-width registers

Input Capture

2-channel input capture can be used to

time input signals from various port pins.

Quadrature

Decoder

2-channel quadrature decoder accepts inputs from

external incremental encoder modules

Designing with RabbitCores:

See details at the top of the page.

Features:

•

3.3 V operation

•

Powerful Rabbit 3000® microprocessor

•

Low-EMI (typically <10 dB μV/m @ 3 m)

•

MAC ID installed

•

47 digital I/O:

41 configurable I/O,

3 fixed inputs, 3 fixed outputs

•

Slave Interface:

Slave port permits use

as master or intelligent peripheral with

Rabbit-based or other master controller

•

With Real-Time Clock: RCM(3400, 3410)

•

With Watchdog/Supervisor: RCM(3400, 3410)

•

Operating Temp.: –40°C to +85°C

•

Humidity: 5-95%, non-condensing

•

Additional Inputs: 2 Startup Mode, Reset In

•

Additional Outputs: Status, Reset Out

•

Connectors: Two 2 x 17 (1.27 mm pitch)

•

Board Size: 1.37" x 1.16" x 0.31" (35 x 29 x 7.4 mm)

694

20-101-0520 RCM3200 RabbitCore Module 89.00 75.30

MOUSER STOCK NO.

Mfr.

Mfr. Part No.

694

20-101-0561 RCM3400 RabbitCore Module 79.00 66.84

694

20-101-0562 RCM3410 RabbitCore Module 59.00 49.92

Flash

SRAM

512K

256K

512K

256K

Software available à la carte. See

www.mouser.com/rabbitsemi

(800) 346-6873

For quantities of 100 and up, call for quote.

MOUSER STOCK NO.

Mfr.

Mfr. Part No.

Price

Each

Description

Price Each

694

101-0552 RCM3200 Development Kit 349.00

Products may be RoHS compliant.

Check mouser.com for RoHS status.

BACK

Mouser Catalog Download