Specifications

Embedded Modules
Rabbit Semiconductor
MOUSER STOCK NO.
694 - 20-101-0541 Keypad/Display Unit in Plastic Case. Water-resistant 99.00
remote keypad/display, 7-key/122 x 32 pixel LCD oper.
at 2.7-5V DC. (Cable not included, see below).
694 - 540-0066 Keypad/Display Unit Cable. 20" cable for 15.00
panel-mount keypad/display unit.
694 - 101-0403 TCP/IP Tool Kit 99.00
694 - 101-0589 Rabbit Cloning Board 89.00
694 - 101-0467 8MB Serial Flash Expansion Board 119.00
694 - 540-0070 RS-232-to-USB Converter Cable 39.00
694 - 151-0113 Connector Adapter Board 15.00
MOUSER STOCK NO.
Mfr.
Mfr. Part No.
MOUSER STOCK NO.
Mfr.
Mfr. Part No.
RABBIT Microprocessor Core Modules
The RCM3000 RabbitCore is Rabbit Semiconductor's most powerful and feature-packed microprocessor core module. Powered by the new Rabbit 3000® - the "EMI-Free microprocessor" - the RCM3000 is the ideal option for designers
who want to rapidly develop and implement embedded systems with fully integrated Ethernet connectivity. Measuring only 2.73" x 1.85" (69 x 47 mm), the RCM3000 operates at 3.3 V (with 5 V-tolerant I/O) and features 6 serial ports.
Built-in low-EMI features, including a clock spectrum spreader, help designers eliminate the kind of emissions-related problems that frequently derail tight development schedules. Available in two models, the RCM3000 is equipped with
10Base-T Ethernet, up to 512K each of Flash and SRAM, quadrature encoder inputs, PWM outputs, and pulse capture and measurement capabilities. Two 34-pin connection headers provide 52 digital I/O shared with the 6 serial ports and
alternate I/O features. The integrated Ethernet port allows instant local or worldwide connectivity. (The RCM3000 is pin compatible with the non-Ethernet RCM3100, facilitating cost-effective implementation of both Ethernet and non-
Ethernet systems) The RCM3000 features a battery-backable real-time clock, glueless memory and I/O interfacing, and ultra-low power "sleepy" modes. A fully enabled slave port permits easy master-slave interfacing with another
processor-based system, and an alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with parallel I/O). The Rabbit 3000 processor's compact, C-friendly instruction set and high clock speeds produce
exceptionally fast results for math, logic, and I/O.
RCM3000 RABBITCORE MICROPROCESSOR MODULES (29.4 MHZ)
Designing with RabbitCores:
The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation
of embedded systems. RabbitCores are powered by high-performance 8-bit Rabbit microprocessors with extensive
integrated features and a C-friendly instruction set designed for use with the Dynamic C® SE development system.
The RabbitCore mounts on a user-designed motherboard and acts as the controlling microprocessor for the user's
system. Small in size but packed with powerful features, these core modules give designers a complete package for
control and communication. The integrated Ethernet port frees designers from the limitations of serial-port
communications and control and permits instant local or worldwide connectivity using low-cost networking hardware.
Embedded systems using the Ethernet RabbitCore module can be controlled and monitored (as well as programmed
and debugged when using appropriate accessory hardware) across any network or the Internet.
Description
Available Options and Accessories
694 - 101-0523 RCM3000 Development Kits 299.00
Development Kit
Feature:
RCM3010
RCM3000
Microprocessor
Rabbit 3000 at 29.4 MHz
Ethernet Port
10Base-T, RJ-45, 2 LEDs
SRAM
512K
Backup Battery
Connection for user-supplied battery (to support RTC and SRAM)
Auxiliary I/O Bus
8 data and 6 address (shared with I/O), plus I/O Read-Write
Serial Ports
6 CMOS-compatible:
• 6 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI),
and 2 as SDLC/HDLC (with IrDA)
• 1 asynchronous clocked serial port dedicated for programming
• Support for MIR/SIR IrDA transceiver
Serial Rate
Max. asynchronous baud rate = CLK/8
Slave Interface
Slave port permits use as master or intelligent peripheral
with Rabbit-based or other master controller
Timers
Ten 8-bit timers (6 cascadable from the first) and one 10-bit timer with 2
match registers
Features:
•
3.3 V operation
•
Powerful Rabbit 3000® microprocessor
•
Low-EMI (typically <10 dB μV/m @ 3 m)
•
Built-in Ethernet for simplified connectivity
•
Up to 512K Flash/512K SRAM
•
52 digital I/O:
44 configurable I/O
4 fixed inputs
4 fixed outputs
•
6 serial ports (IrDA, SDLC/HDLC, Async, SPI)
•
Ultra-low power "sleepy" modes
•
With Real-Time Clock: RCM(3000, 3010)
•
With Watchdog/Supervisor: RCM(3000, 3010)
•
Power: 3.15–3.45 V DC, 150 mA @ 3.3 V
•
Operating Temp.: -40° to +70°C
•
Humidity: 5-95%, non-condensing
•
Additional Inputs: 2 Startup Mode, Reset In
•
Additional Outputs: Status, Reset Out
•
Connectors: Two 2 x 17 (2mm pitch)
•
Board Size: 2.73” x 1.85” x 0.86” (69 x 47 x 22 mm)
128K
Pulse-Width
Modulators
10-bit free-running counter and four pulse-width registers
Input Capture
2-channel input capture can be used to time input signals
from various port pins.
Quadrature
Decoder
2-channel quadrature decoder accepts inputs from external incremental
encoder modules.
The RCM3100 RabbitCore microprocessor core module is the ideal option for designers who want to rapidly develop and implement embedded systems. Powered by the new Rabbit 3000® microprocessor, the compact RCM3100 boasts
powerful features and a small footprint - 1.85" x 1.65" (47 x 42 mm)–to simplify integration. The RCM3100 has 6 serial ports and operates at 29.4 MHz and 3.3 V (with 5 V-tolerant I/O). Built-in low-EMI features, including a clock spectrum
spreader, help designers eliminate the kind of emissions-related problems that frequently derail tight development schedules. Available in two models, the RCM3100 is equipped with up to 512K each of Flash and SRAM, quadrature
encoder inputs, PWM outputs, and pulse capture and measurement capabilities. Two 34-pin connection headers provide 54 digital I/O shared with the 6 serial ports and alternate I/O features. (The RCM3100 is pin compatible with the
Ethernet RCM3000, facilitating cost-effective implementation of both Ethernet and non-Ethernet systems.) The RCM3100 features a battery-backable real-time clock, glueless memory and I/O interfacing, and ultra-low power "sleepy"
modes. A fully enabled 8-bit slave port permits easy master-slave interfacing with another processor-based system, and an alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with parallel I/O). The Rabbit
3000 processor's compact, C-friendly instruction set and high clock speeds produce exceptionally fast results for math, logic, and I/O.
RCM3100 RABBITCORE MICROPROCESSOR MODULE (29.4 MHZ)
Description
Available Options and Accessories
694 - 101-0533 RCM3100 Development Kits 239.00 Call
Development Kit
Feature:
RCM3110
RCM3100
Microprocessor
Rabbit 3000 at 29.4 MHz
Flash
512K (2 x 256K)
SRAM
512K
Backup Battery
Connection for user-supplied battery (to support RTC and SRAM)
Auxiliary I/O Bus
8 data and 6 address (shared with I/O), plus I/O Read-Write
Serial Ports
6 CMOS-compatible:
• 6 configurable as asynchronous (with IrDA),
4 as clocked serial (SPI), and 2 as SDLC/HDLC (with IrDA)
• 1 asynchronous clocked serial port dedicated for programming
• Support for MIR/SIR IrDA transceiver
Serial Rate
Max. asynchronous baud rate = CLK/8
Slave Interface
Slave port permits use as master or intelligent peripheral
with Rabbit-based or other master controller
Timers
Ten 8-bit timers (6 cascadable from the first) and one 10-bit timer with 2
match registers
128K
Pulse-Width
Modulators
10-bit free-running counter and four pulse-width registers
Input Capture
2-channel input capture can be used to time input signals from various port
pins.
Quadrature
Decoder
2-channel quadrature decoder accepts inputs from external incremental
encoder modules.
256K
Power
3.15–3.45 V DC
75 mA @ 3.3 V
Designing with RabbitCores: See details
at the top of the page.
Features:
•
3.3 V operation
•
Powerful Rabbit 3000® microprocessor
•
Low-EMI (typically <10 dB μV/m @ 3 m)
•
Up to 512K Flash/512K SRAM
•
Ultra-low power "sleepy" modes
•
54 digital I/O:
46 configurable I/O
4 fixed inputs
4 fixed outputs
•
6 serial ports (IrDA, SDLC/HDLC, Async, SPI)
•
Ultra-low power "sleepy" modes
•
With Real-Time Clock: RCM(3100, 3110)
•
With Watchdog/Supervisor: RCM(3100, 3110)
•
Operating Temp.: –40°C to +85°C
•
Humidity: 5-95%, non-condensing
•
Additional Inputs: 2 Startup Mode, Reset In
•
Additional Outputs: Status, Reset Out
•
Connectors: Two 2 x 17 (2mm pitch)
•
Board Size: 1.85" x 1.65" x 0.48" (47 x 42 x 12 mm)
694 - 20-101-0507 RCM3000 RabbitCore Module 79.00 73.73
694 - 20-101-0508 RCM3010 RabbitCore Module 59.00 54.70
694 - 20-101-0517 RCM3100 RabbitCore Module 65.00 55.00
694 - 20-101-0518 RCM3110 RabbitCore Module 45.00 40.00
Software available à la carte. See www.mouser.com/rabbitsemi
*
www.mouser.com/rabbitsemi
[phone]
For quantities of 100 and up, call for quote.
For quantities of 100 and up, call for quote.
Price Each
1
10
Mfr.
Mfr. Part No.
Description
Price
Each
Price Each
1
10
Above accessories for RCM (3000, 3010) are applicable with RCM (3100, 3110)
48
Products may be RoHS compliant.
Check mouser.com for RoHS status.
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download