Specifications

Embedded Modules
DLP Design
34
MOUSER
STOCK NO.
DLP
Part No.
DLP DESIGN USB Interface Products
DLP Design's USB Interface products provide a high-speed, hot-swappable, user-friendly connection between your electronic device and a host PC. The USB interface will provide up to 500mA at 5 volts of power for your electronics.
These boards make the extremely complex USB Interface easy for just about anyone to start using, without requiring any in-depth prior knowledge.
USB MICROCONTROLLER DEVELOPMENT BOARDS
USB ADAPTER BOARDS
USB DATA ACQUISITION
DLP-USB245M-G
•
Add USB connectivity to your next project
•
Up to 8 megabit per second data rate
•
USB 1.1 compliant
•
Simple FIFO interface to MCU, FPGA, CPU, etc.
•
Rev 2 silicon from FTDI
•
No in-depth knowledge of USB required
• RoHS Compliant
DLP-USB232M-G
•
Easily convert legacy RS-232 devices to USB
•
Up to 3 megabaud data rate
•
USB 1.1 compliant
•
Full handshaking & modem interface signals
•
Rev 2 silicon from FTDI
•
No in-depth knowledge of USB required
• RoHS Compliant
Price Each
Description Package
12550
MOUSER
STOCK NO.
DLP
Part No.
Price Each
1 10 100
MOUSER
STOCK NO.
DLP
Part No.
Price Each
Description
1
25 100
"Add USB to your next project--it's easier than you might think!"
Schematics available on-line. USB 1.1 Compliant.
The onboard PIC12F629 microcontroller can be reprogrammed with user code (requires programmer).
Drivers and test applications can be downloaded from the website
Acquire data from the world around you using these USB based data acquisition boards.
Learn how to interface to FTDI's FT232BM USB-UART IC using
small microcontrollers and simple RS232-like commands.
Demonstration code now available upon purchase for Visual C++ and Visual Basic.
Microcontroller C source code also available upon purchase
The DLP-USB245M USB-FIFO adapter offers a simple straight-forward
solution for interfacing ASIC or MCU based designs to USB. It comes
complete with royalty-free drivers for most common operating systems.
Features include an easy to use FIFO-like interface, a data transfer rate of
up to 8 megabits per second and a standard .6 inch, 24 pin DIP footprint.
The DLP-USB232M USB-UART Adapter PCB is the ideal solution for upgrading legacy RS232 designs to USB. It comes complete with
royalty-free drivers for most common operating systems. Features include data transfer rates of up to 3 million baud, a full set of modem
handshaking controls and a standard .6 inch, 24 pin DIP footprint.
DLP-245SY-G
•
Simple USB-FIFO interface to Parallax SX48
microcontroller (50MHz)
•
Plugs into a standard 40-pin, 0.6in wide DIP socket
•
Example source code provided for Token firmware feature
•
Up to 7 megabit per second data rate to host computer
•
USB 1.1 compliant
•
Rev 2 silicon from FTDI
•
No in-depth knowledge of USB required
The DLP-245SY is a powerful integrated module based on the
DLP-USB245M USB-FIFO adapter coupled with a Ubicom
SX48 microcontroller and royalty free USB drivers. It plugs into
a standard 40 pin 0.6in wide DIP socket and is ideal for rapid
prototyping and development of USB / Ubicom based designs.
Token I/O code pre-programmed into the SX48’s ROM for
basic port pin input/output capability including access to an
external, on-board EEPROM, and external digital temperature
sensors. The SX48's Flash ROM can be easily erased and
reprogrammed if required using the optional DLP-Flash
Programmer. Refer to the datasheet for full details.
DLP-245PL-G
•
Simple USB-FIFO interface to PIC Microchip 18LF8720
microcontroller
•
50 I/O pins (including A/D inputs) plus 8-bit data bus
•
Example source code provided for Token firmware feature
•
Up to 2 megabit per second data rate to host computer
•
USB 1.1/2.0 compatible
•
Rev 2 silicon from FTDI
•
No in-depth knowledge of USB required
• RoHS Compliant
The DLP-245PL is a powerful integrated module based on
the DLP-USB245M USB-FIFO adapter coupled with a PIC
18LF8720 MPU and royalty free USB drivers. The 18LF8720
microcontroller is preprogrammed with basic functionality for
accessing the port pins and can be reprogrammed with user
hex code via a 5-pin header that is compatible with
Microchip’s MPLAB ICD2 device programmer/debugger
(purchased separately). Refer to the datasheet for full
details.
DLP-245PL-G-CCS
•
Simple USB-FIFO interface to PIC Microchip 16F877
microcontroller
•
Plugs into a standard 40-pin, 0.6in wide DIP socket
•
Example source code provided for Token firmware feature
•
Up to 2 megabit per second data rate to host computer
•
USB 1.1/2.0 Compatible
•
Rev 2 silicon from FTDI
•
No in-depth knowledge of USB required
The DLP-245PB is a powerful integrated module based on the
DLP-USB245M USB-FIFO adapter coupled with a PIC 16F877
MPU and royalty free USB drivers. It plugs into a standard 40
pin 0.6in wide DIP socket and is ideal for rapid prototyping and
development of USB / PIC based designs. Token I/O code pre-
programmed into the 16F877’s ROM for basic port pin
input/output capability including access to the A/D, EEPROM,
and external digital temperature sensors. The 16F877's Flash
ROM can be easily erased and reprogrammed if required using
the optional DLP-Flash Programmer. Refer to the datasheet for
full details.
Price Each
MOUSER
STOCK NO.
USB CABLES
Features:
•
UL2725 Cable
•
100% Open, short
& mis-wire tested
•
RoHS Compliant
Fig.
Length (In.)
Description
100
10
1
25
For quantities of 500 and up, call for quote.
A
B
Color
www.mouser.com/dlpdesign
[phone]
626-DLP-USB245M-G DLP-USB245M-G DLP-USB245M USB-FIFO Adapter PCB DIP-24 25.00 22.73 21.25
626-DLP-USB232M-G DLP-USB232M-G DLP-USB232M USB-UART Adapter PCB DIP-24 25.00 22.73 21.25
172-1024-E A Black 1.8M (71) USB A male to USB B male 3.26 2.71 2.47 2.24
172-1027-E B Black 1.5M (59) Filtered USB A male to USB B male 3.88 3.24 2.54 2.67
626-DLP-245SY-G DLP-245SY -G DLP-245SY USB/Microcontroller PCB 85.00 77.27 72.25
626-DLP-245PL-G DLP-245PL -G DLP-245PL USB/Microcontroller PCB 65.00 62.50 59.15
626-DLP-245-G-CCS DLP-245PL-G-CCS DLP-245PLA-G Module and CCS Compiler 125.00 125.00 125.00
For quantities of 500 and up, call for quote.
For quantities of 100 and up, call for quote.
For quantities of 500 and up, call for quote.
626-DLP-TEMP-G
•
DLP-TEMP 2-Channel Temperature Acquisition Board
•
Monitor and log digital temperature data from 1 or 2 sensors
(one DS18B20 sensor included with purchase of board)
• RoHS Compliant
USB-UART & PICMicro Based Data Acquisition Board
50
626-DLP-TEMP-G DLP-TEMP-G 25.00 23.00 22.00 21.00
Products may be RoHS compliant.
Check mouser.com for RoHS status.
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download