Specifications

NEW SUPPLIER NEW SUPPLIER NEW SUPPLIER NEW SUPPLIER
Embedded Modules
Digi International
29
www.mouser.com/digi
860-CC-V212-RJ CC-V212-RJ ConnectCore 9C Module w/16MB SDRAM, 4MB Flash, Ethernet connector 160.00 156.80
860-CC-V212 CC-V212 ConnectCore 9C Module w/16MB SDRAM, 4MB Flash, Ethernet, Dual Stacked USB connectors 175.00 171.00
(800) 346-6873
DIGI INTERNATIONAL Embedded Modules & Development Tools
Highly-integrated, compact DIMM form factor module based on the 155 MHz NS9360 ARM9 processor provides core processing functionality with integrated network connectivity.
Built on leading NetSilicon 32-bit NET+ARM technology, the ConnectCore 9C module also provides a seamless migration path to a fully integrated system-on-chip solution. Based on the easy-to-use and entirely royalty-free NetSilicon
NET+Works® development platform, the ConnectCore 9C delivers a complete out-of-the-box solution for embedded software development. It provides all the integrated building blocks needed to quickly and cost-effectively create secure
and fully network-enabled product solutions. This minimizes design risk and significantly accelerates the overall embedded software development process.
CONNECTCORE™ 9C POWERFUL ARM9 CORE MODULE
MOUSER
STOCK NO.
Description
Price Each
Digi
Part No.
Embedded Modules
Hardware:
32-bit NS9360 high-performance
RISC processor (155 MHz) w/MMU
Board memory - 4 MB Flash /16 MB RAM
Up to 4 high-speed TTL serial ports
Up to 4 SPI ports
I2C v1.0 bus interface
USB 2.0 Host/Device Interface
LCD controller
General Purpose Timers/Counters/PWM
4 programmable external interrupts
Up to 55 shared General Purpose
Real-time clock
Network Interface:
Standard: IEEE 802.3
Physical Layer: 10/100Base-T
Data rate: 10/100 Mbps
Mode: Full or half duplex
On-board connector: RJ-45 w/magnetics
802.3af power pass-through
Environmental:
Operating temperature:
-40º C to +85º C (-40º F to +185º F)
Relative humidity: 5% to 95%
(non-condensing)
Development Kit Contents:
ConnectCore 9C module
Development board
Macgraigor Raven JTAG debugger or
gdb software debugger
Microcross™ GNU X-Tools
Sample code
Driver source code
ThreadX Real-Time Operating System
Fusion™ TCP/IP stack with full networking protocol
Universal IP address assignment
Network discovery services - ADDP, LDAPv3
Allegro Software Embedded Web Server
SSL 3.0/TLS 1.0 with strong encryption
Flexible & robust file system supporting RAM & Flash
SMICng SNMP MIB compiler
Micro XML SAX parser
Utilities - HTML-to-C compiler, Flash download
860-CC-9C-GN CC-9C-GN ConnectCore 9C Module Development Kit for NET+OS with Raven hardware debugger 2495.00
860-CC-9C-GN-NR CC-9C-GN-NR ConnectCore 9C Module Development Kit for NET+OS with software debugger 1895.00
Development Kits and Tools
110
860-FS-380 FS-380 ConnectCore 9P (9750) Module with NS9750, 64MB SDRAM, 32 MB Flash 320.00 315.00
860-FS-383 FS-383 ConnectCore 9P (9360) Module with NS9360, 64 MB SDRAM, 64 MB Flash 229.00 219.00
Compact high-performance 32-bit NET+ARM processor module family combines superior performance and design integration flexibility with complete embedded software platform support.
Built on leading NetSilicon® 32-bit NET+ARM technology, the network-enabled ConnectCore 9P family provides a modular and scalable core processor solution that significantly minimizes
software and hardware design risk and dramatically improves the time-to-market aspects of your product development process.
Complete and royalty-free development kits supporting the NET+OS, LxNETES Linux, and Microsoft Windows CE environments are available for platform evaluation and product
development use. All development kits include a development board, hardware debugging options, board support packages, sample code, documentation, cables, and related accessories.
CONNECTCORE™ 9P POWERFUL ARM9 CORE MODULE
MOUSER
STOCK NO.
Description
Price Each
Digi
Part No.
Embedded Modules
Hardware:
ConnectCore 9P 9750
32-bit NET+ARM (ARM926EJ-S) high-performance
RISC processor NS9750 @ 200 MHz
Up to 128 MB NAND Flash and 64 MB SDRAM
Integrated 32-bit PCI v2.2/Cardbus Bridge (33 MHz)
16 General Purpose Timers/Counters
Up to 50 GPIO port options
ConnectCore 9P 9360
32-bit NET+ARM (ARM926EJ-S) high-performance
RISC processor NS9360 @ 177 MHz
Up to 128 MB NAND Flash and 128 MB SDRAM
8 General Purpose Timers/Counters or 4 PWM funct.
Up to 73 GPIO port options
ConnectCore 9P Features:
240-pin core processor module in
compact 60 x 44 mm form factor
Integrated 10/100 Mbps Ethernet MAC/PHY
Up to four serial interfaces w/UART and SPI mode
Integrated USB 2.0 compliant host/device interface
On-chip I2C bus interface (100/400 kHz)
Flexible LCD controller with support for TFT/STN displays
External memory bus interface
- 32-bit data bus and 28-bit address bus
Real-Time Clock (RTC) with external battery backup
8 KB serial EEPROM for configuration storage
On-board JTAG interface
USB host and device mode support
Fast-mode I2C hardware interface
860-FS-9064 FS-9064 ConnectCore 9P Module (9360) Development Kit for LxNETES - Linux 2495.00
860-FS-9053 FS-9053 ConnectCore 9P Module (9750) Development Kit for LxNETES - Linux 2495.00
860-FS-9032 FS-9032 ConnectCore 9P Module (9750) Development Kit for NET+OS 2495.00
860-FS-985 FS-985 FS Forth JTAG SuperBooster for programming flash memories with Software - 3 Volt 795.00
Development Kits and Tools
110
For quantities of 50 and up, call for quote.
For quantities of 50 and up, call for quote.
Dimensions:
Length: 3.50 in (88.90 mm)
Width: 2.10 in (53.34 mm)
Height: 0.80 in (20.32 mm)
Ethernet Interface:
Standard: IEEE 802.3
Physical layer: 10/100Base-T
Data rate: 10/100 Mbps
Mode: Full or half duplex
Power Requirements:
9750 - 3.3VDC @ 600 mA (max)
9360 - 3.3VDC @ 400 mA (max)
Environmental:
Operating temperature: 0°C to +70°C (+32°F to +158°F)
Relative humidity: 5% to 90% (non-condensing)
Dimensions:
Length: 2.362 in (6.0 cm)
Width: 1.732 in (4.4 cm)
Height: 0.395 in (1.0 cm)
Power Requirements:
Module: 3.3VDC @ 450 mA max
USB interface: 5VDC @ 500 mA
max per port (optional)
860-FS-365 FS-365 FS Forth A9M2410 Module with 32MB SDRAM, 32MB Flash No Ethernet 195.00 192.00
860-FS-362 FS-362 FS Forth A9M2410 Module with 32MB SDRAM, 32MB Flash with 10 Mbps Ethernet 215.00 211.00
860-FS-662 FS-662 FS Forth A9M2440 Module with 32MB SDRAM 32MB Flash, with 10Mbps Ethernet 209.00 209.00
These high performance, Samsung processor based, modules are members of FS Forth-System's ModARM9 family of modular solutions for embedded
systems. These modules includes SDRAM, Flash and control logic in a compact 60x44mm form factor. Low power consumption allows for battery-powered
applications. Other typical applications include those in Industrial Automation, Retail Point-Of-Sale, Medical Instrumentation, Data Acquisition.
DIGI/ FS FORTH A9M2410/ A9M2440 EMBEDDED CORE MODULES
MOUSER
STOCK NO.
Description
Price Each
Digi
Part No.
Embedded Modules
A9M2410:
Samsung’s S3C2410 microcontroller
ARM920T core (200MHz) with MMU
A9M2440:
Samsung’s S3C2440 microcontroller
ARM920T core (400MHz) with MMU
Features:
LCD controller (STN & TFT)
Touch screen interface
USB 1.1 Host and Device controller
32/64/128 MBytes NAND Flash
16/32/64/128 MBytes SDRAM
3 UART channels
860-FS-9035 FS-9035 FS Forth A9M2410 Module Development Kit for LxNETES - Linux 2495.00
860-FS-9071 FS-9071 FS Forth A9M2440 Development Kit LxNETES - Linux 2495.00
860-FS-985 FS-985 FS Forth JTAG SuperBooster for programming flash memories with Software - 3 Volt 795.00
Development Kits and Tools
1
10
For quantities of 50 and up, call for quote.
I2C interface SPI interface
Serial EEPROM for storing configuration parameters
RTC
Single 3.3V power supply
Optional 10Mbps Ethernet controller CS8900A
Size 60mm x 44mm with 240-pin connector
9C Module
(CC-V212-RJ Illustrated)
9P Module
A9M2410 Module
Products may be RoHS compliant.
Check mouser.com for RoHS status.
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
© Copyright 2007 Mouser Electronics
© Copyright 2007 Mouser Electronics
NEXT
BACK
NEXT
BACK
Mouser Catalog Download