User`s manual

RabbitFLEX User’s Manual www.rabbit.com 3
1.3 RabbitFLEX Tool Kit
The RabbitFLEX Tool Kit contains the software and the extra hardware needed to develop your applica-
tion. This section lists the tool kit items.
Tool Kit Items
• RabbitFLEX BL300F Getting Started Instructions.
• Programming cable, 10-pin header to DB9 connector with integrated level-matching circuitry.
• 48 V AC, 800 mA center-tapped transformer. A transformer compatible with power outlets in con-
tinental Europe is included with kits sold overseas.
• CD, containing Dynamic C 9.41 (or later) with complete product documentation, including this
manual: the RabbitFLEX BL300F User’s Manual.
• Demonstration board with pushbutton switches and LEDs.
• Cable assemblies to access connectors on RabbitFLEX BL300F.
• Hardware bag containing mounting standoffs and screws, female DB9 connector.
• Rabbit 3000 Processor Easy Reference poster.
• Registration card.
1.4 CE Compliance
Equipment is generally divided into two classes.
These limits apply over the range of 30 to 230 MHz. The limits are 7 dB higher for frequencies above 230
MHz. Although the test range goes to 1 GHz, the emissions from Rabbit-based systems at frequencies
above 300 MHz are generally well below background noise levels.
The RabbitFlex single-board computer has been tested and was found to be in confor-
mity with the following applicable immunity and emission standards. Boards that are
CE-compliant have the CE mark.
NOTE: Earlier versions of the RabbitFlex boards that do not have the
CE mark are not CE-compliant.
CLASS A CLASS B
Digital equipment meant for light industrial use Digital equipment meant for home use
Less restrictive emissions requirement:
less than 40 dB µV/m at 10 m
(40 dB relative to 1 µV/m) or 300 µV/m
More restrictive emissions requirement:
30 dB µV/m at 10 m or 100 µV/m