User`s manual

44 www.rabbit.com RabbitFLEX BL300F Options
4.3.11.2 Sinking Driver 100 mA
This section presents the circuit schematic and the characteristics for the 100 mA sinking driver. The 100
mA sinking driver does not have the protection diodes that are in the 1 A circuit.
Figure 4-17 Sinking Driver 100 mA Circuit Schematic
Power On/Reset State: Off, high impendance
Table 4-15. Sinking Driver 100 mA Characteristics
Sinking Driver, 100 mA 40 V
1 kW
VERSION 6.01
I/O
Pin
Digital Interface
Cell
Q1A
R1
Symbol Parameter Note Min Typical Max Unit
V
S
Supply Voltage 0 40 V
V
ON
On Voltage 1 0.4 V
I
L
Leakage Current 10 uA
I
O
Output Current 100 mA
I
QH
High Level Quiescent Current 4 1 uA
I
QL
Low Level Quiescent Current 4 4 mA
t
ON
Turn On Time 2 46 nS
t
OFF
Turn Off Time 3 1.1 uS
Note 1: At I
O
Max
v1.02
Note 2: From V
S
Max to 10% of V
S
Max at I
O
Max with resistive load
cell v6.01
Note 3: From 0 V to 90% of V
S
Max at 10 mA with resistive load
Note 4: From PowerCore Supply5
DC
AC