User`s manual

RabbitFLEX User’s Manual www.rabbit.com 27
4.2.1.5 Connector 6
J6 differs from J1-J5, in that its pins can only be customized from the global options page of the Rabbit-
FLEX Configurator. This is because J6 is used for serial communications and the speaker.
Figure 4-7 Pinout Options for J6
4.2.2 Connector Mating Information
The connectors J1 through J6 on the RabbitFLEX BL300F are Molex Micro-Fit 3.0 connectors, Molex
part # 43045-1018. There are a number of companies that offer custom harness assemblies that could be
mated with these connectors. Molex has a list of recommended cable assembly manufacturers on their
website:
www.molex.com/product/harness/stars.html
Rabbit recommends both Blaylock's, Inc. and Mann Organization for custom cable assembly.
www.blaylocksinc.com/
www.mannorganization.com/index.html
1
3
7
24 8
J6 = Connector 6
485-
9
GND
TxD/E
RxD/E
RxF
TxF
GND
GND
Speaker
485+