User`s manual

24 www.rabbit.com RabbitFLEX BL300F Options
4.2 Overview of Connector and Cell Association
The table in this section summarizes the user-configurable connectors, their corresponding unconfigured
cells and the available circuitry that can be used to configure the cells. (See Section 3.2 for more informa-
tion about cells.)
4.2.1 Connector Pinout Diagram
This section identifies the location of the connectors and their customizable options.
Figure 4-2 Location of J1 through J6 on RabbitFLEX BL300F
For obvious reasons, a board-specific pinout diagram is impossible to include in a generally applicable
user’s manual such as this one. The following diagrams give the pinouts of the user-configurable connec-
tors and the options available for each of the pins. To review the option/pin combinations that exist on your
particular board, look in the generated library FAxxxxxxx.lib or the board summary file FAxxxxxxx.txt.
These files, which are downloadable from the RabbitFLEX Configurator, tell you which option is con-
nected to each of the configurable pins.
Table 4-1. Connectors and their Unconfigured Cell Types
Connector
Unconfigured
Cell Type
Digital Analog
3.45 V
Power
5 V
Power
Digital In Digital Out ADC DAC
J1 2-transistor X X X X
J2 2-transistor X X X X X
J3 2-transistor X X X X X
J4 1-transistor X X X X
J5 1-transistor X X X