User`s manual

130 www.rabbit.com
Rabbit recommends an exclusion zone of 0.25" (6 mm) around the RabbitFLEX BL300F board in all
directions when the RabbitFLEX BL300F board is incorporated into an assembly that includes other com-
ponents. Figure A.2 shows this exclusion zone.
Figure A.2 RabbitFLEX BL300F Exclusion Zone
NOTE: All measurements are in inches followed by millimeters enclosed in parentheses.
The RabbitFLEX boards were tested for heat dissipation over the specified operating temperature range,
and normal heat dissipation by convection was found to be adequate. If you plan to use the board in a
tightly enclosed space, additional forced-air cooling will likely be needed.
0.25
(6)
0.25
(6)
0.25
(6)
0.25
(6)
0.25
(6)
0.25
(6)
Exclusion
Zone
0.25
(6)
0.25
(6)
3.725
(95)
6.00
(152)
1.22
(31)
1.22
(31)