Owner`s manual

7. Pull out the Activated
Carbon Filter and discard
plastic wrapping.
6. Remove the Customized Filter from the black frame to discard plastic wrapping.
Return the lter to its frame. Make sure the front of the lter is facing up. See
Customized Filter chart, below, to identify the front of your lter.
Know your Customized Filter!
Toxin Absorber Customized Filter:
Pet Allergy Customized Filter:
Germ defense Customized Filter:
Odor Remover Customized Filter:
Front color: Purple
Back color: Black
Front color: Purple & Orange
Back color: Orange
Front color: Purple & Yellow
Back color: Yellow
Front color: Black (thicker fabric like material)
Back color: Black
BackFront
10. Reattach the front panel by
latching the top hooks, then
securing the bottom of the panel.
8. Return the lters to the lter case in the
following order from back to front:
Activated Carbon Filter,
Customized Filter,
BioGS HEPA Filter,
Medium Filter,
Pre-Filter.
(See diagram on page 9).
9. Return lter case to the unit. Slide the
bottom of the case back into the unit (1),
then press the top in (2).
Finishing up!
11 12