Owner`s manual

ManualsBrandsRabbit Air ManualsAir CleanerSPA-780A

Ultra Quiet Air Purifier

Hello!

-----------------------------------------------------------------------------------------------

Warranty

SPA-700A

SPA-780A

Models:

Registration Card

Rabbit Air*

201 West Garvey Ave., Suite 102-168

Monterey Park, CA, 91754-7418

*Please do not send products or other correspondence to this address.

Owner’s

manual

ww w.rabb it air.com

fold here

Visit us at www.rabbitair.com

For Questions: Call 888.866.8862

24/7 customer care

You can also register online at www.rabbitair.com

Return this card now for:

• Product Protection

By registering your product and purchase information, we can conrm the date of

purchase to secure your warranty. This conrmation serves as security in the event that

your original proof of purchase is lost, or in case your unit needs any servicing in the future.

• Proof of Ownership

Your model number, serial number, and other information will be kept in our les. Please

complete and return this registration within 30 days from purchase in order to receive

our 5 Year Limited Warranty.

Please fold and seal with tape before mailing. Do not staple.

Product Support Questions: Contact Rabbit Air at (888) 866-8862

Sales Inquiries: Contact Sylvane at (800) 934-9194 or visit sylvane.com

Summary of content (14 pages)

PAGE 1
Ultra Quiet Air Purifier Hello! w w w.rabbitair.com Rabbit Air* 201 West Garvey Ave., Suite 102-168 Monterey Park, CA, 91754-7418 Please fold and seal with tape before mailing. Do not staple. fold here *Please do not send products or other correspondence to this address.
PAGE 2
General Safety Information About Your MinusA2 Air Purifier Caution: When using electrical appliances, observe the following basic precautions to reduce the risk of fire, electric shock and injury to persons: Electrical Safety Instructions • Please read all tips and warnings before using the MinusA2 Air Purifier. • Use only as directed by the MinusA2 Air Purifier Owner’s Manual. • The MinusA2 Air Purifier is only designed for use in a 110/120V outlet.
PAGE 3
Operation Guidelines • Do not block the air intake and air outlet. • Do not use the MinusA2 Air Purifier on or around hot surfaces. • Do not use the MinusA2 Air Purifier in a room where it may come into contact with steam. • Do not operate the MinusA2 Air Purifier on its side. Remote Control Tips • Do not install the MinusA2 Air Purifier in greasy or damp environments. • Do not use detergent or soap to clean the MinusA2 Air Purifier. • Do not operate the MinusA2 Air Purifier without filters.
PAGE 4
Meet your MinusA2 Back view Handle Front view Mood Light Power Cord Unit Hanger Air Outlet Control Panel/ Display Panel Remote control Particle Sensor Power Speed Light Sensor Air Quality Indicator Mode Mood Light Odor Sensor Battery (AAA size) 5 6
PAGE 5
Control Panel Indicator Lights Turbo High Medium Low Silent Replace Filters Pollen Auto Filter Reset MOOD LIGHT Ion Ion on/off Sleep Light Sensor Air Quality Indicator Auto Mode Indicator Fan Speed Indicator Turbo High Medium Low Power Turbo High Press and hold the power button for two seconds to turn the unit on or off. Medium Indicates the fan speed of the air . The lowest speed is Silent. The highest speed is Turbo.
PAGE 6
Let’s begin - Initial set up Meet the Filters 1. Remove the front panel by lifting from the bottom and pulling up. BioGS HEPA Filter Medium Filter grasping the handles on both sides and pulling 3. Pull the tabs on the front of the Pre-Filter to remove it. Customized Filter Charcoal Based Activated Carbon Filter Pre-Filter tabs Pre-Filter 4. Remove the white Medium Filter from the black frame to discard the plastic wrapping. Filter case 5. Remove HEPA Filter and discard plastic wrapping.
PAGE 7
Finishing up! 6. Remove the Customized Filter from the black frame to discard plastic wrapping. Return the filter to its frame. Make sure the front of the filter is facing up. See Customized Filter chart, below, to identify the front of your filter. 9. Return filter case to the unit. Slide the bottom of the case back into the unit (1), then press the top in (2). 10. Reattach the front panel by latching the top hooks, then securing the bottom of the panel.
PAGE 8
Mode Selection(Pollen Mode or Auto Mode) Operation Modes Plug the unit into a 110/120V outlet. Auto Mode Pollen Plug the unit into a 110/120V outlet. After turning on the unit, briefly press the Mode/Filter Reset button to select your desired mode of operation, Pollen or Auto. Press the power button. The air purifier will start up automatically in Auto Mode. The Mood Light will be a solid blue.
PAGE 9
Changing the Sensitivity Level of the Sensors Mood Light Operation Mood light not only changes colors, but it also indicates the current operation mode. On/Off You can adjust the sensitivity level of the air quality sensors. The sensors come preset at a standard sensitivity level as a default. Auto The color of the Mood Light corresponds to the current mode of operation. Auto Mode: Blue Pollen Mode: the color of the mood light will shift: Blue-Purple-Light Purple-Pink.
PAGE 10
Cleaning the Unit Surface Cleaning and Maintenance Always unplug the unit before cleaning. outlet Cleaning the Particle Sensor Clean particle sensor every three to six months. Clean the air intake and outlet using a vacuum cleaner or soft brush. 1. Open the particle sensor cover on the right side of the unit (when facing the unit). 2. Use a damp cotton swab to clean and dry the lens, dust inlet and dust outlet. air inlet The unit surface should be cleaned depending on the air quality of the room. 1.
PAGE 11
Filter Cleaning and replacement schedule* Filters Replacing the BioGS HEPA FilterEvery 12 Months Discard the old HEPA Filter, do not reuse.
PAGE 12
Wall-Mounting your MinusA2 (Optional) Only use the approved Rabbit Air wall-mount kit to install the MinusA2 Air Purifier on your wall. The MinusA2 Air Purifier is designed to be either free standing or wall-mounted. Wall-mount installation guidelines: • Make sure the MinusA2 Air Purifier has at least two feet of clearance from the ceiling and eight inches of clearance on either side. • Be careful not to drop the front panel or filter case when replacing the filters. • Do not pull on the power cord.
PAGE 13
TROUBLESHOOTING GUIDE Symptom Unit will not turn on. Suggestions • The power plug may be loose. Press the power button on the unit, or the power button on the remote. • Make sure the front panel is securely attached to the main unit. The top hooks on the front panel must be latched on the hinges of the main unit. The remote control does not work. • Battery could be dead or depleted. • Remote might not be pointed directly at the unit. • Make sure the battery is correctly installed.
PAGE 14
*First Name_________________________________________________________________________ Limited Warranty *Last Name_________________________________________________________________________ *Address___________________________________________________________________________ *City_______________________________________________________________________________ Rabbit Air warrants that your Air Purifier will be free from defects in material or workmanship for a period of Five (5) years from the date of purchase