Rabbit Air TM User's Guide www.RabbitAir.com Model No.
Safety Instructions WARNING: When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1 • Read all instructions before using the BioGSTM air purifier. • Use only as directed by the BioGSTM air purifier user's guide. To reduce the risk of electric shock, do not attempt to service the product in any way other than in the manner described in this user's guide.
Cautions Concering the Operation of BioGSTM Air Purifier • Do not block the intake and air outlet. • Do not use the unit near or on hot objects such as a stove. • Do not use the unit where it may come into contact with steam. • Do not use the unit on its side. • Do not install the unit in a location where there is heavy generation of oily residue such as kitchen. • Do not use detergent or soap to clean the unit. • Do not operate the unit without installing the filters.
Part Names Front View of Air Purifier Air Outlet Main Unit Display Indicator lights and main control button for the air cleaner. Filter Reset Button Odor/Chemical Sensor After replacing or cleaning the filters, press the filter reset button to reset the indicators. Detects odor such as tobacco smoke, pets, household chemicals and etc. Detects dust, smoke, pollen, animal dander and etc.
Main Unit Display Unit Status Indicator Unit status indicator will stay on when the air purifier is on standby or is operating. The indicator will flash for 15 seconds when the air purifier is detecting the air quality baseline. Particle/Dust Level Indicator Odor/Chemical Level Indicator Indicates level of dust or particles by changing color in five steps from light green, green, yellow, orange to red.
Preparation List of Parts Remote Control BioGSTM HEPA Filter Washable charcoal based activated carbon filter Nano-silver Pre-Filter 3V Lithium Coin Battery Rabbit Air 1. Filter Installation CAUTION To maintain the quality of the filters, they are placed in the unit within plastic bags. Please remove the filters from the plastic bags before using the unit. Step 1 Place the unit facing up and Remove the front panel 1 2 Lay the unit on a flat surface such as table or floor.
How to set up Home Air Quality Baseline. When the power plug is inserted into the wall outlet, the unit will register the current home air quality as a baseline (reference point). It will take 15 seconds for the Air Quality Level Sensors to indicate the air quality level. You will see the unit status indicator on the main unit display flashing for 15 seconds.
1 Auto Mode The fan speed of the air cleaner will change automatically depending on the amount of impurities in the air as detected by the dust and odor sensors. Press the Auto Mode button on the remote control to start the Auto Mode operation.
7 Negative Ion Mode Unit generates negative ion by pressing Negative Ion Mode button. Negative Ion Mode Mode of Operation Rabbit Air ATTENTION 5 Pollen Mode This mode of operation is recommended for the pollen season. The unit will alternate between low and medium fan speed every 10 minutes. Press the Pollen Mode button on the remote control to start the Pollen Mode operation.
Main Unit Control Button You can control the air purifier by the main unit control button. When you press the button, the operation mode of the air purifier will be changed according to the following diagram. Auto Mode Silent Mode Low Speed Medium Speed High Speed Turbo Speed Standby Cleaning and Maintenance To maintain optimum performance of this product, please clean the unit and filters as recommended.
If your pre-filter appears to have dirt that has not been removed by vacuuming, please follow the steps below to wash the pre-filter. Remove the pre-filter from the unit. (Fig. 3) Fill the sink with lukewarm water and gently wash the filter under the water for 2-3 minutes or until it is completely clean. Rinse the filter with clean tap water. Use towel to remove any excess water from the filter. Allow the filter to dry for a few hours or overnight.
Replacing the BioGSTM HEPA filter When the filter replacement indicator light comes on, replace the old BioGSTM HEPA filter with a new one. To maintain optimum performance of this product, please replace the filters as recommended. The air quality and surrounding environment determines the duration and life span of the filter and while it may last longer than expected, it is advisable to change the BioGSTM HEPA filter at least every 18 months or 1.5 year of unit operation.
TM Rabbit Air Ultra Quiet Air Purifier SPA-421A/582A LIMITED WARRANTY TM Rabbit Air warrants that your BioGS Air Purifier will be free from defects in material or workmanship for a period of Five (5) years from the date of purchase. To activate the warranty, please complete and return your warranty registration within 30 days of purchase TM of your air purifier to Rabbit Air.
Troubleshooting Before calling for repair, please review the list below. The problem may not be due to unit malfunction. Symptom Unit does not operate. Solution Check if power plug is loose. Press the main unit control button or any buttons on the remote The remote control does not work. Check if the battery has been depleted. (Refer to P.5) Check if the battery is inserted correctly. (Refer to P.5) Point the remote control directly towards the main unit display.
1. Mr. 2. First Name Mrs. 3. Ms. 4. Miss Initial Last Name Street Apt. No. City State/Province ZIP/Postal Code Country www.RabbitAir.com E-mail Your date of birth: Month 3. 4. Marital status: 1. Date of purchase: 5. Model number: (please refer to owner's manual or the back Month Day Married Name of store where purchased: 5. 6. 7. 8. 12. Own Rent Where did you first learn about Rabbit Air products? 1. 2. 3. 4. 5. 6. 7. 8. 9.
Please do not send products or other correspondences to this address First-Class Postage Required Post Office will not deliver without proper postage. Rabbit Air 201 West Garvey Ave., Suite 102-168 Monterey Park CA 91754-7418 TM WARRANTY REGISTRATION FOR Ultra Quiet Air Purifier RETURN THIS CARD NOW FOR: Product Protection With the information you provide we can confirm the date of purchase of your product. This confirmation is of benefit to you, especially if your original proof of purchase is lost.
