Cut Sheet

VANLED20NF/PCS
Need help? Tech help line: [phone] Email: [e-mail] Website: www.rablighting.com
Copyright © 2021 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 1 of 3
Low-profile vandal-resistant fixture covers the footprint of most traditional canopy
lights. Available in flat or drop lens with frosted and unfrosted options.
Color: Bronze Weight: 10.0 lbs
Project: Type:
Prepared By: Date:
Driver Info
Type Constant Current
120V 0.19A
208V 0.12A
240V 0.1A
277V 0.09A
Input Watts 22.9W
LED Info
Watts 20W
Color Temp 4000K (Neutral)
Color Accuracy 83 CRI
L70 Lifespan 100,000 Hours
Lumens 3,228
Efficacy 141 lm/W
Technical Specifications
Compliance
UL Listed:
Suitable for Wet Locations. Covered Ceiling
Mount Only.
IESNA LM-79 & LM-80 Testing:
RAB LED luminaires and LED components have
been tested by an independent laboratory in
accordance with IESNA LM-79 and LM-80.
Electrical
Driver:
Class 2, Constant Current, 120-277V, 50-60Hz,
120V: 0.19A, 208V: 0.12A, 240V: 0.1A, 277V:
0.09A
THD:
8.26% at 120V, 7.26% at 277V
Power Factor:
99.8% at 120V, 94.9% at 277V
Photocell:
120V Swivel Photocell Included. Photocell is only
compatible with 120V.
LED Characteristics
LEDs:
Long-life, high-efficacy, surface-mount LEDs
Color Stability:
RAB LEDs exceed industry standards for
chromatic stability
Color Uniformity:
RAB's range of Correlated Color Temperature
follows the guidelines of the American National
Standard for Specifications for the Chromaticity
of Solid State Lighting (SSL) Products, ANSI
C78.377-2017.
Construction
Maximum Ambient Temperature:
Suitable for use in up to 40°C (104°F)
Cold Weather Starting:
Minimum starting temperature is -40°C (-40°F)
Lens:
Vandal-resistant polycarbonate textured opaque
for low glare flat lens
Housing:
Die-cast aluminum housing and lens frame with
(4) 1/2" NPS side conduit entries and
weatherproof rear wire plug and access plate
Mounting:
Ceiling mount to recessed junction with
knockout template or directy to ceiling surface,
utilizing side conduit entry points