Instructions
INSTRUCTIONS
CYLINDER SURFACE MOUNT INSTALLATION
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING:
• Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
• Fixture is suitable for wet location for outdoor applications on ceiling and covered canopies.
• Fixture must be mounted a minimum of 4 feet above ground level.
(Important: For wet locations, caulk the seam between the
xture and ceiling.)
1. Screws (2) Canopy
Fig. 1
2. Junction Box Adaptor Platesupplied
by others
3. FixtureTether Cable
Tether SlotJunction Box Adaptor Plate
Fixture
4. CanopyJunction Box Adaptor Plate
Screws (2) the Fixture Junction Box Adaptor
Plate.
1.
2.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - sales@rablighting.com
Free Lighting Layouts
Answered online or by request
© 2022 RAB LIGHTING Inc.
CDLED-IN-0322
Fixture
Screw (2)
Junction Box
Adaptor Plate
Tether Cable
Tether Slot
CAUTION: Be sure xture temperature is cool enough to
touch. Do not clean or maintain while xture is energized.
1.
2.
PINK (or GRAY)
LIGHT
FIXTURE
Vaux 12V
YELLOW
GROUND
GROUND
( - ) DIM V
( + ) DIM V
COMMON
LINE BLACK
WHITE
PURPLE
Fig. 2
1. LINE
2. COMMON
3. GROUND
4. (V+) DIM
5. (or gray) (V-) DIM
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty
73687-RAB
• Fixture supports 120V Triac and 0-10V Dimming.
Canopy