Cut Sheet

HB101A
JOB NAME:
DATE:
TYPE:
DESCRIPTION
Bullet design with large glare shield for effective light control. Durable one piece die cast
with rugged mounting arm, weatherproof gasket and drain holes. Accepts 150 watt PAR 38
max. Lamp not supplied.
SPECIFICATIONS
Compatibility with old H100:
H101 floods and accessories replace the
discontinued RAB H100 and accessories.
Parts are not interchangeable. Contact
factory for price and availability of the old
H100 Series.
Gaskets:
High temperature silicone rubber extends
around both socket and lamp.
Housings:
Die cast aluminum with powder coat finish
Lamps:
Medium base Par-38 lamps up to 150 watts.
Halogen lamps give brighter light and choice
of beam spreads
Sockets:
Porcelain with all copper current carrying
components
Swivels:
Fully adjustable with sure-grip locks. 1/2"
NPS threaded arm with serrated locking
swivel fits all standard mounting covers.
Color matched EZ Grip lock nuts.
UL Listing:
Suitable for wet locations. Suitable for
mounting within 4' of the ground. Can be
aimed above horizontal with accessory hood
or visor
Patents:
RAB sensor and fixture designs are
protected under U.S. and International
Intellectual Property laws
Color:
Bronze
Weight:
1.65
DIMENSIONS
ORDERING INFORMATION
Total
Watts
Lamp
Type
Lamp
Base Ballast
Starting Amps/ Operating Amps
120V 208V 240V 277V
Input
Watts
LAMP
ANSI
Initial
Lumens
Lamp
Hours
150 PAR38 Medium 0 0 0 0 0 0 0 0 0
Factory Installed Options
Add suffix to Catalog Number
RAB Lighting, Inc. • 170 Ludlow Ave• Northvale, NJ 07647 • Tel: 888 RAB-1000 • Fax: 888 RAB-1232 • www.rabweb.com
© 2008
Note: Specifications may change without notice