Cut Sheet

FNH6 6” HOOD
Note: These instructions do not cover all details or variations in equipment
nor do they provide for every possible situation during installation, operation
or maintenance.
Thank you for buying RAB lighting xtures. Our aim is to design the
best quality products to get the job done right. We’d like to hear your
comments. Call the Marketing Department at 888-RAB-1000, or email:
[e-mail]
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical
Code and all applicable local codes. Proper grounding is required for
safety. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation
of the product and the hazards involved.
WARNING: Make certain power is OFF before installing or
maintaining xture.
02/08
(4) Screws
CLEANING
Clean glass lens with nonabrasive glass cleaning solution.
CAUTION: Be sure xture temperature is cool enough to
touch. Do not clean or maintain while xture is energized.
Installation
6” Hood mounts with
(4) #10-24 x 3/8” stainless
steel screws to door as shown.
Screws are provided with hood.
Wire Guard (GDFN) can be
used with hood as shown.
®
Easy Installation & Product Help