Welcome Lightcloud Blue TM Lightcloud Blue Controller LCBLUECONTROL/D10/W WE’RE HERE TO HELP: 1 (844) LIGHTCLOUD 1 (844) 544-4825 support@lightcloud.
Hello Lightcloud Blue is a wireless lighting control system that allows you to control RAB Lighting's various compatible devices via an APP. The Lightcloud Blue Controller is a remotely controlled switching and dimming device that can be installed into luminaires. Product Features Wireless Control & Configuration Switching up to 4.
Contents Lightcloud Blue Controller NPT Nut Instruction Manual Wire Nuts x4 x2 Specifications & Ratings PART NUMBER LCBLUECONTROL/D10/W DIMENSIONS: 1.3” (D) x 2.5”(L) INPUT 120/277VAC, 50/60Hz WIRELESS RANGE Line of Sight: 700 feet Obstructions: 70 feet CURRENT DRAW <0.6W(Standby)–1W(Active) LOAD SWITCHING CAPACITY LED/Fluorescent Incandescent 120V~/1.7A/200VA 120V~/4.2A/500W 277V~/1.5A/400VA 277V~/4.
Setup & Installation Turn off power 1 WARNING OFF OFF 1a Find a suitable location Use these guidelines when installing devices: • If there is a clear line of sight between a Lightcloud Blue Controller and another Lightcloud Blue device they can be placed up to 500 feet apart. • If a Lightcloud Blue Controller and another Lightcloud Blue device are separated by ordinary drywall construction, try to keep them within 70 ft. of each other.
1b Optional - What You Need for Lightcloud System Lightcloud Gateway and Wall Bridge is required to Connect with Lightcloud System 2 Install the Lightcloud Blue Controller in junction box The Lightcloud Blue Controller can be mounted into a junction box, with the radio module always outside any metal enclosure. If no sensor is used then the second modular cable can be tied off and placed inside the fixture or box.
Setup & Installation (cont’d) Install Luminaire 3 Install the fixture with integrated Lightcloud Blue Controller to a constant power source. Do not place Lightcloud-controlled fixtures down circuit from any other switching devices such as switches, sensors, or time clocks. Labeling your device 4 When installing devices, it’s important to keep track of their Device IDs, installation locations, panel/circuit #s, dimming function, and any additional notes. To organize this information, use Device Table.
Setup & Installation (cont’d) 5 Power up 6 Verify power and local control Confirm Status Indicator is blinking red. Confirm local control using the Device Indentification Button.
Setup & Installation 7b (cont’d) Commission 1. Download RAB Lightcloud Application from Apple Appstore or Google Play. 2. Tap the + button in the Lightcloud App to add Lightcloud Blue Controller which is in the pairing mode. 3. Simply follow the instruction in the App to complete the commission and setup. Functionality Configuration All configuration of Lightcloud products may be performed using the Lightcloud web Application, or by calling RAB.
FCC Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules.
Lightcloud is a commercial wireless lighting control system. It’s powerful and flexible yet easy to use and install. Learn more at lightcloud.com 1(844) LIGHTCLOUD 1(844) 544-4825 support@lightcloud.
