Cut Sheet

LED BOLLARD INSTALLATION INSTRUCTIONS
BLED-IN-0412
WIRING
Universal voltage driver permits operation at
100-240V(10W) or 100-277V(13W) and at 50 or 60Hz.
1. Connect the black xture lead to the (+) LINE
supply lead.
2. Connect the white xture lead to the (-) COMMON
supply lead.
3. Connect the bare copper Ground wire from xture to
supply ground.
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
CLEANING & MAINTENANCE
CAUTION: Be sure xture temperature is cool
enough to touch. Do not clean or maintain while
xture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open xture to clean the LED. Do not touch
the LED.
The design of the LED Bollard is protected by U.S. patent
D599,050; D599,049 and patents pending in Canada, China
and Taiwan.
MOUNTING PLATE
Assemble xture(s) to bollard before mounting the
Bollard to the Mounting Plate.
1. Place the Mounting Plate over Anchor Bolts.
2. Use four Leveling Screws or shims to level the
Mounting Plate.
3. Tighten assembly using the washers, lockwashers
and nuts provided.
4. Make sure supply leads extend far enough to
make xture connections.
5. Slide Gasket down around the bottom of the
Mounting Plate.
6. Use the four Mounting screws to mount the
Bollard to the Mounting Plate. Tighten securely.
Mounting
Plate
Anchor
Bolts
Leveling
Screws
Mounting
Screws
Bollard
MOUNTING PLATE DIMENSIONS
NOT ACTUAL SIZE. Use dimensions. Use Mounting
Plate as a template when possible.
Gasket