Installation Guide
INSTRUCTIONS
A17™ XFU FIELD ADJUSTABLE AREA LIGHT INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
Bolster Plate
Bolt
Arm Cover
Pole
Arm
A17 XFU
IMPORTAN T
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
WARNING: Do not use an electric generator to test LED xtures.
WARNING: Min 75 °C SUPPLY CONDUCTORS.
Notice: Adjustable angle is 0-35°
ArmScrews FixtureArm
Cover ArmFig. 1
ArmFixture,Arm Cover
ScrewsFig. 2
Arm
Arm Cover
Arm
35°
Bolster PlatePoleFig. 3
Arm to Square PoleBolt
Arm Cover
(supplied by others).
Pole
Arm
(Fig. 8).
Pole
Bolster PlatePoleFig. 3
Arm to Round Pole Bolt (Fig. 4)
Remove Silicone Plate (Fig. 4).
Arm Cover
(supplied by others)
PoleArm
(Fig. 8).
Pole
Pole