Installation Guide

ManualsBrandsRAB ManualsArea LightRAB A17 Area Light

Table Of Contents

INSTRUCTIONS

A17™ AREA LIGHT INSTALLATION





A17 Sliptter

A17 Universal Pole

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.







WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.

WARNING: Do not use an electric generator to test LED xtures.

WARNING: Min 75°C SUPPLY CONDUCTORS.





 Arm CoveArmArm

Cover ScrewsFig. 1

 Arm

 ArmArm



 Arm CoverScrewsFig. 2

Arm

Screws

Arm Cover

Arm











 Bolster PlatePole Fig. 3

 Round Pole Adaptor Plate

  ArmSquare PoleBolt

 Arm Cover

 PoleArm



(Fig. 7)

 Pole



1. Bolster PlatePole Fig. 3

2. ArmRound Pole Bolt

3. Arm Cover

4. PoleArm



(Fig. 7)

5. Pole

Pole

Bolster Plate

Bolt

Pole

Arm

Round Pole

Adaptor Plate

Arm Cover

Summary of content (6 pages)

PAGE 1
INSTRUCTIONS A17™ AREA LIGHT INSTALLATION RAB Lighting is committed to creating high-quality, aﬀordable, well-designed and energy-eﬃcient LED lighting and controls that make it easy for electricians to install and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com A17 Slipfitter A17 Universal Pole IMPORTANT READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PAGE 2
INSTRUCTIONS A17™ AREA LIGHT INSTALLATION RAB Lighting is committed to creating high-quality, aﬀordable, well-designed and energy-eﬃcient LED lighting and controls that make it easy for electricians to install Figure 14 and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com SLIPFITTER MOUNT Locking Bolt NOTICE: Adjustable angle is 90°. 1.
PAGE 3
Microwave Motion Sensor OPTIONAL REMOTE MVS-OD SENSOR Not Included (Order REMOTE-OD) 10-15M FIXTURE ALTITUDE RoHS IP RATING PERFORMANCE Operating voltage 12 ± 2V DC Operating current 30mA Output DIM 0-10V Stand-by power <0.5W Brightness 70%/80%/90%/100% Detection area 20%/50%/75%/100% Hold time 10s/1min/10min/30min Daylight threshold 10Lux/30Lux/50Lux/100Lux/Disable Stand-by period 1min/30min/60min/+∞ Stand-by dimming level 10%/20%/30%/50% Microwave frequency 5.
PAGE 4
Microwave Motion Sensor MVS SENSOR FACTORY SETTINGS WIRING DIAGRAM BRIGHTNESS 100% HOLD TIME 1 Minute DAYLIGHT Disabled SENSITIVITY 50% STAND-BY DIMMING LEVEL 20% STAND-BY TIME 1 Minute Black/White: 12V+ Purple: DIM+ Pink: 12V-/DIM- DIMENSIONS Weight: 0.
PAGE 5
Microwave Motion Sensor LUX ON-OFF Sensor automatically turns oﬀ light when ambient brightness exceeds preset lux level.
PAGE 6
INSTRUCTIONS REMOTE-OD RAB Lighting is committed to creating high-quality, aﬀordable, well-designed and energy-eﬃcient LED lighting and controls that make it easy for electricians to install and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.