Specification

NDICLED3R-15DNHC
Need help? Tech help line: [phone] Email: [e-mail] Website: www.rablighting.com
Copyright © 2020 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice
Page 1 of 3
3-inch new construction downlight with a patented 3-in-1 design that supports a
variety of options for a broad range of applications.
Weight: 10.4 lbs
Project: Type:
Prepared By: Date:
Driver Info
Type Constant Current
120V 0.12A
208V 0.08A
240V 0.07A
277V 0.06A
Input Watts 15W
LED Info
Watts 15W
Color Temp 4000K (Neutral)
Color Accuracy 90 CRI
L70 Lifespan 100,000 Hours
Lumens
See Table
Below*
Efficacy N/A
Technical Specifications
Listings
UL Listed:
Suitable for wet locations in a covered ceiling
Construction
IC Rated:
Suitable for direct contact with insulation
Aperture Size:
3" Rough-In
Trim:
Accepts cones with trim
Housing Component:
This component must be ordered with New
Construction Round Trim Module in order to
make a complete fixture.
See here for New Construction Round Trim
Module.
Cold Weather Starting:
Minimum starting temperature is -40°C (-40°F)
Maximum Ambient Temperature:
Suitable for use in up to 40°C (104°F)
Housing:
Cold-rolled steel and aluminum
Installation:
Nailer bar and butterfly brackets included; C-
channels optional for acoustic tiles
Green Technology:
Mercury and UV free. RoHS-compliant
components.
Performance
Lifespan:
100,000-Hour LED lifespan based on IES LM-80
results and TM-21 calculations
Electrical
Driver:
Constant Current, Class 2, 120-277V, 50/60Hz,
120V: 0.12A, 208V: 0.08A, 240V: 0.07A, 277V:
0.06A
Dimming Driver:
Universal dimming driver supports TRIAC, ELV
and 0-10V. See dimmer compatibility guide
here.
Surge Protection:
2kV