Instructions
INSTRUCTIONS
GUS INSTALLATION
Note: These instructions do not cover all details or variations in
equipment nor do they provide for every possible situation during
installation, operation or maintenance.
LIGHT
FIXTURE
INSIDE FIXTURE
BATTERY
Pink (or Gray)/DIM–
Black/Switched Line
Green/Ground
White/Neutral
Black/Unswitched Line
Purple/DIM+
BACKUP
DRIVER
BATTERY
CONNECTOR:
CONNECT
ONLY AFTER
AC SUPPLY
POWER IS
CONNECTED
GUS-IN-1021
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly - sales@rablighting.com
Free Lighting Layouts
Answered online or by request
© 2021 RAB LIGHTING Inc.
CAUTION: FOR BATTERY BACKUP FIXTURE.
BATTERY.
BATTERY
(Fig. 6).
NOTE: Make sure that the necessary branch circuit wiring is available.
An UNSWITCHED AC source of power is required. The emergency driver
must be fed from the same branch circuit as the LED driver.
CAUTION: Do not use any supply voltage other than 120-277V
50/60 HZ.
UNSWITCHED HOT HOT AC
UNSWITCHEDUNSWITCHED
SWITCHED
SWITCHEDSWITCHED HOT AC
xture
pink (or gray) (V-) DIM
DIMDIM
GROUND
AC power
BATTERY.
Charging
Indicator Light
BATTERY
BATTERY
Note: The charging indicator light and test switch are
located on the LED tray below the lens.
73372-RAB